| Place of Origin: | |
|---|---|
| Brand Name: | |
| Model Number: | |
| 1: | It cost low |
| 2: | very thin and less heat-absorbing |
| 3: | the efficient loading volume can be increased |
| 4: | Low labor strength and high work efficiency |
Quick Details
Specifications
Partition Net is made by fiber glass coated with modified resin. It is a good substitute for iron and Teflon spacer in the production of resin bond cutting-off or depressed wheels.
Partition Net is applied in the sintering process of resin bond cutting-off or depressed wheels, which thickness is from 2-10 mm.By the advantage of non-sticking, temperature-resisting, pliability and ventilation
It improves the surface condition of the wheels.
Comparing with the iron plate, the Partition Net
1)
Low labor strength and high work efficiency
because of no adhesion phenomenon occur.
The yield of qualified products can be increased by 10% due to knocking
and shocking when unloading.
Low labor strength and high work efficiency
because of no adhesion phenomenon occur.
The yield of qualified products can be increased by 10% due to knocking
and shocking when unloading.
2)
Partition Net solves the problem of " bright speck" on the surface of wheels
and can optimize the surface of wheel
and then greatly improve thermal radiation
and surface roughness of wheels.
The cutting efficiency is increased greatly.
Partition Net solves the problem of " bright speck" on the surface of wheels
and can optimize the surface of wheel
and then greatly improve thermal radiation
and surface roughness of wheels.
The cutting efficiency is increased greatly.
Besides, as the ideal substitution for Teflon spacer, it's very welcome because of its long service time and low cost.