SPECIFICATION	UL-199E
Length	5200MM
WIDTH	2140MM
HEIGHT	520MM
PULLING CAPACITY	95KN
RATED VOLTAGE	220/380V
AIR SUPPLY REQUIRED	0.8MPA
RADIUS OF PULLING	360°
MAX LOAD	3500KG

 

The platform is rectangular tube platform, and the thickness of rectangular tube is 6mm, welded full board of many positioning holes surround the platform, the tolerance is small for flatness, strength is big, and many station holes is convenient for fixing any tools, no tensile dead zone.

 

1. Tilt hydraulic lifting platform makes the accidental vehicle loaded and unloaded more convenient(even drive the car onto the platform directly).    

 

2. The pulling towers can work along the track for 360° rotation, operated more convenient. The pulling towers pull strong each other and highly active, and the material is made of the 10mm wall thickness seamless pipe.

 

3. The jaw of main clamps, spiral movements, in the jaw to maintain the level of state, the upper and lower pole vertically movements, fine-tuning the level of all kinds of different vehicle chassis height of rapid adjustment.

 

4.  The function of leading arm: provide stretching for any point and any directions during the collision repair process, provide powerful up stretching.

 

5. High Precision alloy measuring system, it is made of special aluminum. It can make three-dimensional coordinate measure, so that make the car body size is same as the original car.

 

6. Allocate one centralized electric control cabinet. Remote control: A key in hand, operate freely.

Remote controller: Make the platform lift, please press “up” key; make the platform down, please press the “down” key. When you need the tower up and down stretching, please press “tower one” key or “tower two” key.

 

7. The global data synchronization by Mitchell and the major automotive companies provide and maintain the latest data models.

 

8. Perfect service system, completely relieve your worries.