W11-20mm 2500mm  3 roll plate bending machine
Features:

1. The machine adopts three-roller symmetrical structure.

2. The upper roller is the passive roller and the two lower rollers are the main driving rollers.

3. The upper roller moves vertically in the central symmetrical position of the two lower rollers, 
which is achieved through the drive of the lead screw, the nut and the worm.

4. The two lower rollers rotate and provide the plate with torque through the meshing of the 
output gear of the reducer and the gear of the lower rollers.

Main Configurations:

Chassis and Side Frame:Q235A

Upper Roller Material: 42 CrMo

Lower Roller Material: 45# steel

Main Motor:Siemens

Sealing Rings: VALQUA

Electrical Components:Schneider

Specification	Unit	Value
Model	Set	W11-20×2500
Symmetry Rolling Thickness	mm	20
Max Rolling Width	mm	2500
Steel Yield Limit	Mpa	245
Dia of  Upper Roller	mm	Φ340
Dia of  Lower Roller	mm	Φ260
Min diameter when full load	mm	Φ850
Central Distance Between Lower Rollers	mm	260
Rolling Speed	m/min	4
Main Motor Power	KW	15