High Quality Stay Rod-Overhead Line Fittings-Tubular Stay Rods
The tubular turnbuckle shall have hexagon head (consisting of a forged hex ended plug welded in the tube and tapped right hand). It shall have provision for greasing.
The stay anchor and the adjustable head shall have hexagon lock nuts of the same size as the hexagon head of the tubular turnbuckle.
The lower end of the stay anchor shall be forged square to fit square plate.
The stay rod shall be complete with a square plate for securing the rod to a concrete stay block. The dimensions of the square plate shall be 100X100X6mm and 100X100X12mm as indicated on the drawings for each size of stay rod.
The stay adjustable head shall have a forged eye with a thimble suitable for the specified stay wire sizes.
The stay rod assembly shall be galvanized to ISO 1461.
The complete stay rod assembly shall have the minimum failing load as stated in clause4.4 and shall be in accordance with Drawings No. TSP/03/022

We are the manufcturer with ten years experience of galvanized steel line hardware used to link clamps to insulator, or to link insulator and ground wire clamp to tower or sujection stucture. Various overhead Electric Line Fitting special type inaccordance with mounting condition.
There will no sharp edges, and corners rounded. All galvanized steel line hardware will be clean rust free, smooth and uniform throughout and will also be free from burrs.
Various prefored Cable Fitting for ADSS/OPGWhas high tensile strength. It is straight and uniform. And it passed ISO9001.

We also can supply grounding piece according to your request.