Item Number:TF-719
Usage :FDY Lubricant oil for PES filament
Formulation with no prohibited surfactants according to international standard
Common property:
Appearance: yellowish transparent liquid(room temperatures)
Active content:91± 2%
Ionic Character:nionic/Nonionic
PH Value:6-8
Main component:Special syntetic agent,nonionic and anionic surfactant
Usage guidance
1. Emulsion Preparation
Dissolving Water Specification:
Recommended conductivity bellow 1 µs/cm,bellow 10µs/cm, is allowed
Hardness:Bellow 3 mg/L (Calculated by CaCO3)
Content of SIO2:bellow 0.1 ppm
Recommended temperature condition:Oil temperature:25-35 ℃
DISSOLVING WATER Temperature:25-35℃
Allowed temperature condition:Oil temperature :20-40℃ , Dissolving water temperature:20-40 ℃
2. Emulsion preparation method:
Before adding FDY oil,please keep stir the iron free water thoroughly,,then slowly adding TF-719 into water;
Finishing adding FDY oil,please keep strring for 30mins and check the phase of emulsion .
Adding preservative recommended by our company:300-500ppm,check the phase again.
3. Recommended oil adding method
Recommended emulsion concentration:10-18%
Recommended oil adding method:by wheel or nozzle
Recommended picking-up rate:0.6-1.0%
Please contact us before usage if the application method is not followed according to up-mentioned instruction;