HTCLEAR YE

(Decolourizing Agent)

 

Purpose

-- For flocculation treatment of wasted water.

 

Properties

-- Excellent flocculation and decontamination effect while the decolourization effect is up to 99% and COD removing effect is over 70%.

-- Fine floc and slow sedimentation. It will get a better performance with flocculant improver.

-- Wide temperature range (1-80℃) and wide pH range (4-10).

-- Low cost while the dosage is 100ppm and the cost is 50% lower than general decolourizing agents.

-- Less and dense sludge while it is 30% less than general decolourizing agents.

 

Physical Characteristic

-- Appearance            :        colourless transparent viscous liquid

-- 10% pH value         :        6-7

-- Ionicity                    :        cationic

-- Solubility                 :        stable to alkali ,acid, hard water and electrolyte

 

Direction for Usage

1.          Dilute the decolourizing agent YE with water by 20-40 times.

2.          Add the diluted liquor in pipes before the pumps or reactor after the pumps. Make sure the decolourizing agent is completely dissolved.

 

Package, storage and transport

-- Package                   :        125KG in polyethylene drums

-- Storage           :        6 months in drums at room temperature, avoid direct contact with acid and

alkali products.

-- Transport                :        Transport as non-dangerous goods, pay attention to pack and discharge.

 

Notes

-- Please test with sample before use.

-- When application, please combine with your equipments and textile categories to optimize the experiment, and then select the best technology.

-- Please perform compatibility test when using this product with other softener or auxiliaries.