1.Fixed light path (the laser working head is fixed, the board moves)

2.Double-direction imported precision pole running( more precision than normal one), precision electrical mould, only 0.05mm error.

3.Cut through 18-22mm at a time, comes with vertical and even sharp board slit, with the speed of cutting one meter line in two minutes, one eight-joints box mould can be cut well within half hour.

4.powr costing less, using cost low,200 single-phase electricity, consume 3 degrees of electricity  each hour (300W machine type)

5. hi-strength & stable machine tool, weight about 2000kgs,without distortion after long-term operation.

6.No need auxiliary gas during working(300W power machine type).

7.It is always available & no need to wait for on-off, save time & costing.

Machine Type:H-9060

Laser Type: CO2 Laser machine

Laser Power:60-150W

Max width:900x600mm

Demension:1800 x 1400 x 1100mm

Cutting thickness:PVC board 6-8mm, wood board:9-15mm, acrylic:≤25MM

Cutting speed:0-300mm/min software setting

Cutting Precision: ±0.05mm

Repetition precision:laser cutting machine ≤ 0.02mm

Operating Temperature: 0-45℃

Cooling water:inclusion-free purified water

Working Voltage: 220 ± 10% 50HZ

Numerical control board: LED screen, Chinese & English version operation menu, touch button

Instruction system: international level:CDR,CAD,,,all kinds of software can be used.

Control Software:accurate mould cutting system(Chinese & English versio).

Applicable Industry: Mould & Manufacture & Technology Jewelry...etc

Laser Proofing: can use real paper material to make box shape desgin proofing, in comparing with mechanical proofing, becuase of no touching with pressure, so more precision and faster, also equipment investment & usual using cost is much lower than mechanical proofing.

Laser Printing: can print single pattern or large pattern on bromide paper, save a set large graphic plotter (a few thousand RMB), and as the machine print the paper is the same one with real mould cutting machine, so that we can avoid the error which generatedby different equipment's precision.

Laser Cutting: can 5mm,6mm PVC board and separate to cut 16mm,18mm,22mm wood board mould, can cut 0.45,0.53,0.71,1.05,1.42mm..etc any width cutting fissure.

Fast investment return: no need to use recyle gas during working, consume1.5 degrees of electricity each hour, usage consumption(including laser consumption) will less RMB2.5, it will cost less RMB800 each month( continuously work 12 hours a day, 30 working days per month) , only have a few percentage of other laser mould cutting machine. Cutting speed can reach 500meters/days( it will be faster if cut 6mm pvc board), monthly output value is considerable, normaly all machine cost will be ruturned wihtin 3 months.