LED Multi-line Wall Washer is an ideal landscape lighting product widely used in the illumination on single buildings, historical buildings, and advertising boards.

 

Integrated with a 1W Red, Green and Blue LED, this LED Multi-line wall washer can achieve more than 16million kinds of color. With a built-in micro-chip in the controlling system for small project, even without a professional controller, this lighting fixture can make up plenty of lighting effects, such as slow-glow, fading, flashing, chasing. In large projects where a big number of this lighting are used, a professional DMX 512 controller should be applied to achieve splendid lighting effect.  

 

Technical Parameters:

Model No.	BWT-W-48W5-E01	BWT-W-48RGB5-E01	BWT-W-72W5-E01	BWT-W-72RGB5-E01
Input Voltage	AC100-240V	AC100-240V	AC100-240V	AC100-240V
Wattage	58.5W	58.5W	82.5W	82.5W
Light Source	48*1W High Power LED	48*1W High Power LED (R16G16B16)	72*1W High Power LED	72*1W High Power  LED (R8G8B8)
Color	Pure Color	RGB	Pure Color	RGB
Beam Angle	15°/30°/45°/60°	15°/30°/45°/60°	15°/30°/45°/60°	15°/30°/45°/60°
IP Rate	IP65	IP65	IP65	IP65
Control Method	N/A	DMX512	N/A	DMX512
Ambient Temperature	-30℃~ + 50℃	-30℃~ + 50℃	-30℃~ + 50℃	-30℃~ + 50℃
Dimension	L600mm × W147mm × H180mm	L600mm × W147mm × H180mm	L600mm × W147mm ×H180mm	L600mm × W147mm × H180mm

Installation Instruction:

Step 1: Drill four fitting holes as per the position of the brackets of the LED Wall washer.

Step 2: Take out the screw from the brackets

Step 3: Place the brackets into the fitting holes and screw in to fix the LED Wall Washer.

 

Attentions:

 

1. Choose suitable power cable as per the quantity of wall washer in one line.

2. Add a DMX signal amplifier every 32pcs of wall washer.

3. Place an end cap on the connector of the last wall washer.