Factory Direct Price for Epson DX4 DX5 DX6 Printhead Eco Solvent Ink

*Full solvent based pigment is available

 

Ink Type: ECO Solvent Pigment Ink

DIGITEX (INKPRO) Eco solvent Ink is specially engineered to optimum the printing performance on your printer instead of original ink. It offers same printing quality while zero difference in operation but faster in drying time, higher pigment density, boarder color gamut, greater scratch resistance, low cost and wider uncoated media support. With the ECO formula, INKPRO eco solvent ink is virtually odorless for maximum convenience and comfort does not require any special ventilation or environmental equipment. It's fully compatible to all Roland, Mimaki and Mutoh printers with outstanding performance. Three formulations are available to optimize your priters.

 

Color Available

Cyan, Magenta, Yellow, Black, Light Cyan, Light Magenta, Orange, Green, Cleaner

 

Compatible Printers

Printers with Epson DX4, DX5, DX6 printheads (Roland DX7), like EPSON, Roland, Muoth, Mimaki, Agfa Chinese OEM Printer, such as Allwin, Xenon, Galaxy, Smart, Skycolor. etc.

 

Technical Specifications

PHYSICAL PARAMETERS

Viscosity: 3-9cP (25℃ )

Surface Tension: 25-36 mN/m

Light fastness: 7 to 7/8

 

PRINTING CONDITIONS

-Available temperature: 20-30℃

-Optimum temperature: 20-25℃

-Humidity: 35 to 65% Rh (No condensation)

-Temperature change: ± 10℃ / hour or less

-Dust: Equivalent to normal office level

*We recommend that you preset the pre heater and pirnt heater temperature at 35℃(95Fahrenheit). Since some media need to raise the heater temperature, test the

media and check the image quality in advance.

 

PRINTER TEMPERATURE SETTINGS

- Pre-heat: 35-40℃

- Printing heat: 35-40℃

- Dryer heat: 30-40℃

 

STORAGE & TRANSPORTATION

Storage: 0 to 25℃ (Average daily temperature). Be sure to keep in the airtight condition.

Transportation: -20 to 60℃. Avoid the condition lower than -20℃ and higher than 60℃.

 

SHELF LIFE

12 months from the date of manufacture at room temperature (specified condition). Within one months after opening the package.

 

Ink Capacity

1000ml Bottle, 1L Pouch, customizable bulk package

 

*We supply 220ml and 440ml cartridges for most of the machines available on the market, such as Roland, Mimaki, Mutoh...,including chips and smart card in case needed.

 

Accessories

1. Solvent Cleaner

220ml/ 440ml Cartridge 1000ml Bottle

 

2. Bulk systems

We supply bulk system(continuous ink supply system, automatic ink refill system, a bulk feed ink system) for the most printers available in the market. For more information, contact us indicating the brand and model that you are using please.