Heat Transfer Material

DIGITEX Heat Transfer Material
A type of inkjet printable heat transfer media for custom, short run apparel and textile applications. It's a thin heat-sensitive applique material to print vividly and cut accurately to ahere to cotton and poly-blend fabric products by thermally activated.

Product at a Glance
Ink compatibility: Eco solvent/ Solvent based Pigment Ink
Ultra thin 0.27-0.50 mm thickness
Size: 0.75 x 30m/ roll
Core Diameter: 3"
Shelf Life: 2 years

Print, cuts, applies with ease
Vivid Imaging and colorfast durable
Soft hand, Premium results
Compatible with 100% cotton and poly-blend fabrics
For light and dark colored fabrics

Applications
T-shirt, sweatshirt and jacket appliques,  Sports jerseys names and numbers. Uniform of athletic dub/ Sporting club, Fabric hats, caps, aprons, bags and totes

Ease Procedure and high productivity
Print & Cut---Convey---Heat Press
Code: MPC-W-7530, MPC-S-7530, MPC-G-7530, MPC-F-7530
Description: Heat Transfer Paper    
Substrate Colored: White, Silver, Golden, White Flocky   
Function: Print &Cut, Direct Cut        
Application: For Both Light &Dark Colored Fabrics        
Tandem: Carry Film &Cut Film   
*Carry film(coed#MAF-20) is used for transfer graphics and position to the decoration place.
*Cut film(coed#MAF-30) is used for cutting small graphics.

Applications Instructions
Step 1.
Print the graphics. Set heat settings of your printer to 30o -35o C. Other settings refer to the instructions issued by the manufacturer of the ink jet printer.

Step 2.
Contour cut the graphics. Recommened cut settings {speed 10-30, Press 40-50, offset 0.3}. Set cut pressure according to condition of cutting blade and results. Due to the product is thin and stretchable, using a newer blade to achieve the best quality results. After cutting, remove all unwanted material excess from the grahics by weeding.

Step 3.
Laminate the target graphics by carry film. Ensure the film is applied from the center out, without air bubbles. Carry and position the graphic in the desire location of the garment and presse for 20-25 seconds.

Step 4.
Heat press. { Temperature: 165o C; Time: 15 seconds} Then, remove the carry film at a sharp angle to ensure that the graphic is not distorted or stretched in the process. Allow at least 5-30 minutes for the ink on the printed surface to dry completely. Using a t-shirt clamshell heat press and preheat to180o C. Use firm pressure for Heat temperature and time may vary according to the fabric's thickness and make-up.

Step 5.
Applique complet. The garments are ready to wear etc.

Wash instructions
Wash garments inside out to protect the heat trasfer appplique.
Use gentle wash cycle setting in washing machine.
Use a mild soap and do not bleach.
To dry by low heat, tumble setting or hang dry to extend the applique's durability.
Machine washing and drying will shorten the life of the graphics.

Storage Conditions
Handle with care to prevent surface contamination that may affect the printable surface.
In a environment of 60o-80o (15o-25o C) and 30-70% Relative humidity(non-condensing)
Keep in cool dry area with original packaging without any sunligth.
Clean and relatively dust-free.
If storage conditions are beyond recommended operating ranges, allow the material to acclimate to the production environment