Product name: chemical equipment special teflon mesh PTFE teflon mesh PTFE filter base cloth

Teflon filter in polymer materials

Product categories: chemical separation devices/equipment/filter equipment

Mesh: 10-----200

Material: 100% pure PTFE filament,

Weaving methods: use 500 dtex filament fiber woven (monofil), for the plain weave fabric.

Product performance:

1. Temperature - 20 ~ 250 °C, allow quenching heat, or alternating operation.

- 20 ~ 250 °C ~ + 482 ° F (- 4)

2. Pressure to 0.1 ~ 6.4 Mpa (full negative pressure to 64 KGF/cm2)

0.1 ~ 6.4 Mpa (Full vacuum to 64 KGF/cm2)

3. High temperature resistant, use the working temperature of 250 °C.

4. Good low temperature resistance, good mechanical toughness; Even if the temperature dropped to - 196 °C, also can maintain the elongation of 5%.

5. Corrosion - to most chemicals and solvents, inert, acid alkali, water and a variety of organic solvents.

Weather - to be the best in the plastic in aging life.

6. High lubrication - is the lowest in the friction coefficient in solid materials.

7. Don't stick - is the smallest, the surface tension of the solid material don't adhere to any material.

8. High humidity environment also apply;

9. Not easy to aging;

10. No pollution;

PTFE base fabric can be according to the requirements of the filter material strength, design different warp/weft density. Base fabric are more than 1000 n, warp/weft to strong water pressure can reach 50 kg!