Bull Gear Drive Mixing Mill/Rubber Mixing Mill/Two Roll Mixing Mill

1. The roller is made of chilled cast iron. It is divided into hollowed roll and drilled roll. The inner of hollowed roll is machined.

The base has integrated base and separated bases.

2. The driving mode includes open driving, half open driving and enclosed driving.

3. The roll is supported by roller bearing so it has low noise and long service life.

4. The roll bearing adopts grease lubricating and oil lubricating.

5. There are three types of nip adjustments, manually adjustment, electrically adjustment and hydraulic adjustment.

6. The pressure transducer system is available for directly displaying the working pressure and control the feed.

7. The produce is complied with nation-established safety standard (this standard is identical with Europe Standard)

8. User can choose the stock blender according to the processing procedure

Item 

XK-160 XK-230 XK-250 XK-300 XK-360 XK-400 XK-450 XK-560 XK-550B XK-660
Working Diameter of rolls (mm) 160 230 250 300 360 400 450 560/510 550 660
Working Length of Rolls (mm) 320 600 620 750 900 1000 1200 1530 1500 2130
Front Roll Surface Speed (m/min) 

8.95 10.21 14.1 15.1 16.25 18.65 24.26 27.72 27.94 28.6
Friction Ratio 1:1.35 1:1.19 1:1.17 1:1.25 1:1.25 1:1.27
1:1.27 1:1.2 1:1.22 1:1.24 1:1.09
Max. nip (mm) 4.5 7 8 10 10 10 15 15 15 15
Capacity per Batch(kg) 

1-2 6-10 8~15 15~20 20~25 18-35 25-50 35~50 50~60 165
Motor Power (kw) 5.5 15 18.5 22 30 37 55 90 110 245
Dimensions (mm) 

L 1380 2800 3400 3400 3780 4350 5200 5845 5870 7465
W 860 1200 1500 1500 1850 1850 2380 2284 2475 3662
H 1320 1120 1500 1550 1750 1785 1840 1978 2045 2080