Introduction:

The Steel plastic composite geogrid uses high tensile steel wire (or other fiber) specially handled and polyethylene (P.E) with other assistants.Then squeeze it out and make it become composite high-strength anti-pull belt and the surface has rough embossing then it is reinforcement earthwork belt.Warp knitting vertically and horizontally using this single belt and welding the joint using a special welding technology to molding is reinforcement geogrid.

Performance:                                            

(1) High tensile strength and low distort and creep deformation       

(2) Improving bearing capacity of road bed. 

(3) Anti-corrosion and extending the project life.                       

(4) Shortening construction period, reducing cost       

Application:

Reinforce for roadbed, retaining wall and road cracking project

in the railway,high way, bridge,dam,

deck landfill and so on.

Specification:

High-strength steel Plastic uniaxial Geogrid (Vertical)

Item	GSZ30	GSZ50	GSZ80	GSZ100	GSZ120	GSZ150
Vertically ultimate tension, Kn/m	30	50	80	100	120	150
Vertically ultimate elongation ratio	3% max	3% max	3% max	3% max	3% max	3% max
Tension at 1% elongation, Kn/m	23	38	63	81	98	125

High strength steel plastic biaxial Geogrid (Vertical and Horizontal)

Item	GSZ30-30	GSZ45-45	GSZ60-60	GSZ80-80	GSZ100-100	GSZ120-120
Biaxial ultimate tension, Kn/m	30	45	60	80	100	80
Biaxial ultimate elongation	3% max	3% max	3% max	3% max	3% max	3% max
Tension at 1% elongation, Kn/m	23	36	48	63	81	98