2048Pixel SD Card Digital Led Controller for WS2801 WS2811 LPD8806 LPD1886  etc. IC LED Pixels 
Input Voltage:DC5V,DC7.5-24V
 Product Size:L165*W80*H30mm, Net weight: 300g
 SPI Signal Output,One controller Max  control 2048 Pixels
 LEDEDIT software make programs ,Copy files to SD card.
File Memory Type:00_1.led,01_1.led, Max 16 files
 Can Control led products with the following IC:
APA102,LPD6803, LPD8806, WS2801,WS2811,LPD6813, LPD1886,UCS6909, UCS6912, UCS1903,UCS1909,UCS1912,
TLS3001,TM1812,TM1809,TM1804,TM1803, DZ2809,WS2801,SD600,D705,P9813,
SM16716, DMX512, etc.

System features
1.32—256 GraySupport software Gamma correction
2.Support the rules and special-shaped handle.
3.Single-port outputcan support 2048 lights
4.Off-line(SD Card) control, play back content stored in the SD card.
5.The controller store a maximum of 16 programscopy multiple files to the SD card in order, after formatting the SD card as " FAT" format.
6.The program must be named in orders . Ex. 00_1.led, 01_1.led, 02_1.led.
7.Compatible with single line or double line chips.
 
NOTE
1. When the controller less than 512 pixels the frame rate can reach 30fps. When T-1000S control more than 512 pixels the frame rate will slow down automatically.
2. The controller must use the new software LedEdit 2012.

Mode of connection
Multiple the controllers can be cascaded together and work synchronous.
GECOSD1P-2048 one TTL(SPI) signal and one RS485 signal port outputcan control 2048 pixels
When the chip for LED is single line chip just with data, then just need to be connected with DAT and GND of the controller. If the chip for LED is double line chip with DAT and CLK, then need to be connected with DAT, CLK, and GND of the controller.
If you need to use RS485 signal you need to connect controller A with LED A (DMX+), controller B with LED B(DMX-),
When you need to built a new project the controller type for the software isT-1000-IC model.