We have 1000w-1500w 12v 24v ; 2000w-3000w 12v 24v 48v ; 4000w-6000w 24v 48v; split phase 4000w-6000w Input:220VAC, Output: 110/220VAC ; 4000w -6000w  Input:240VAC, Output: 120/240VAC  pure sine wave inverter with charger .

Feature

Pure Sine Wave Split Phase Inverter to run motor loads and sensitive electronics

Thermally activated cooling fans

Dual GFCI outlet for safe operation

Built in USB port for charging USB devices

Bypass Charge and Power Supply Function

High overload ability up to 300% rated power (20 sec)

Multi-stage charger to charge deep cycle batteries quickly and efficiently

Easy to check with inverter condition with LED indication that can be upgraded to LCD

Integrated transfer switch allows seamless switching from shore power to battery power

Audio alarm with warning/error codes to alert user to check inverter condition before unit shutdown

High Transfer time,below 4ms,it makes the power work without breaking down for ever

Full Rang of Intelligent Protection,over load,over current,over voltage,over heat,short circuit,low voltage and so on;

Easy to Install and Friendly Operation .

Specification

Nominal Power: 4000W

Peak Power: 12000W

AC output: AC110V/120V or AC220V/230V/240V

Phase & waveform: Single phase & sine wave

Acceptable Voltage: 95-127VAC or 194-243VAC(wide mode)

Line Low Transfer:  85V±4%  or  184(154 wide mode±4%)

Line Low Return: 95V±4% or 194(164 wide mode±4%)

Line high Transfer: 135V±4% or  253±4%

Line high Return: 127V±4% or 243±4%

Frequency: 50Hz or 60Hz (auto sensing)

Line Low Transfer: 47Hz for 50Hz,57Hz for 60Hz

Line high Transfer: 55Hz for 50Hz,65Hz for 60Hz

Phase & waveform: Single phase & sinewave(bypass mode sync to input)

Voltage Regulation: ±10%rms(bypass mode sync to input)

Frequency: 50Hz±0.3Hz(bypass mode sync to input)

Crest Power: 3 times of ratings

Short Circuit Protection: Yes, shutdown after 10 minutes

Power Factor: 0.9-1.0

Battery Voltage: 24v / 48v

Minimum Start  Voltage: 20V / 40V

Low Battery Alarm: 21V / 42V

Low Battery Transfer: 20V / 40V

High Voltage Alarm: 32V / 64V

Max Charging  Current: 65A OR 35A

Over Charge Voltage: 31.4V / 62.8V

Transfer Efficiency:  line Mode＞95%    Battery Mode ＞88%

power saver: Available when the load is less than 25 Watts

Indicators:

7-LED Display

From the right to the left,LED1 line mode (green lighting), LED2 inverter mode

(green lighting), LED3 charging mode(yellow lighting), LED4 Fully charged 

(green lighting), LED5 over heat shutdown(red lighting), LED6 Overloaded

shutdown(red lighting), LED7 Saving Mode(green lighting)

 3-LED Display

Charging Mode(green lighting), inverter mode(green lighting), Alarm(red lighting)

Switch selector:

Saving Mode is on/off when push the switch forwards/backwards,   keeping it horisontal is turning the inverter off.

Audible Alarm:

Sounding when the heatsink's tem is over 105℃ and shutdown after 30 seconds.

Protections:

low battery, over charging, over temp, over load

Operating  Environment: 0-40℃,0-90%RH(non-condensing)

Audible Noise: ＜60dB

Size: 598mm*218mm*179mm

Net Weight (KG): 38kg