Items

Standard

Input

Rated voltage and frequency

Three Phase 380V, 50/60Hz

Wide voltage

Voltage allowable vibration range

320V~480V

Output

Voltage

0~380V

Frequency

0Hz ~ 500Hz

Over-load capability

G3 Series:

150% rated current for 1 minute,

180% rated current for 2 seconds;

P3 Series:

120% rated current for 1 minute,

150% rated current for 2 seconds.

Control mode

V/F control

Freq. Setting resolution

Analog terminal input

0.1% max output frequency

Digital setting

0.01Hz

Panel analog setting

0.4 % max frequency

External pulse

0.1% max frequency

Freq. accuracy

Analog Input

Within 0.2% max. output frequency

Digital Input

Within 0.01% Setting output frequency

External pulse

Within 0.1% Max. output frequency

Control character

V/F Curve (Voltage-Frequency character)

Base frequency can be set from 5~500Hz arbitrarily, and there are three kinds of curve: constant torque, Dec torque 1 and Dec torque 2.

Torque Boost

Manual Setting: 0~20% of rated output, Auto-boost: Automatically boost

torque according to output current.

Auto Energy-saving running

Adjust output voltage and slip

compensation properly according to output current, which will make the motor working in highest efficiency.

Acc./Dec time setting

0.1~6000 seconds can be set continuously, and S type and line type can be selected

Dynamic braking

Over 75% (External the braking resistor)

DC braking

It is selected respectively at start and stop, and its frequency is 0~15Hz, the action voltage is 0~15%, and the action time is 0~20.0 second or act continuously

Auto current-limiting function

Fast auto current-limiting function ensures not to occur the over-current during the accelerate process or under the impact load.

Voltage stall prevention

Ensure not over-voltage in Dec process.

Low noise running

Carrier freq. can be adjusted continuously form 1.5KHz to 15.0KHz, which can reduce the motor's noise furthest.

Speed tracking restart

It can realize the smoothness restart and instantaneous stop then restart function.

Freq setting signal

Analog input

DC voltage 0~10V,-10V~10V, DC current 0~20mA ( Upper limit and Lower limit can be selected )

Digital setting

By the operation panel

Pulse input

0~10kHz (Upper limit and Lower limit can be selected)

Startup signal

FWD, REV, Startup signal can be selected and self-keep (Three line control)

Timer and Counter

Embedded one timer and one counter, which will help the system's integration

Multi-speed control function / Wobble frequency

Seven stages programmable multi-speed control at most, every stage's running direction, running time can be set respectively. In external terminal control, It reaches 15 stages, and there are 6 kind of running modes. Including wobble frequency

Embedded PID control

Ordinal PID

Expediently compose the simple control system without accessional PID controller.

Special for water supply (Need accessories)

Be able to construct the constant-pressure water-supply system of 4 pumps switch at

most, which includes the following

functions: pressure upper or Lower limit alarm, Sleep or wake, Timing water-supply etc. multi kind running mode.

Operation function

Setting the upper and lower limit of frequency, frequency jump-running, reversal running limit, slip frequency

compensation ,auto constant-voltage running, RS485 communication frequency increment and decrement control, fault

self-restore running, multi inverter coupled running

Output signal

Running status

(OC Output)

During the running of inverter, Frequency arrival, Frequency level, detection, over load alarm, external fault, stop machine, frequency upper-limit arrival, frequency lower limit arrival, under voltage, stop zero speed running, programmable multi-speed running state, Internal counter arrival, Internal timer arrival, pressure lower-upper limit alarm

Indicated instrument

Output frequency, voltage, current, Motor speed, PID setting and feedback, External pyrometer.

External voltmeter,

Display

Running status

Output Freq., Output current, Output voltage, Motor rotate speed, Setting Freq., PID setting, PID feedback, Model temperature, Accumulative running time, Analog I/O, Terminal Input status

Alarm content

Last six fault records, Output frequency, Setting frequency, Output current, Output voltage, DC voltage, Model Temperature, Terminal status, Accumulative running time of Last fault trip.

Protective / Alarm function

Over-current, over-voltage, under voltage, electronic short-circuits. Thermal protection, over-heat,

Operating Environment

Temperature

-10oC to +50oC

Humidity

Under 90(non-condensing)

Ambient environment

Indoors(no inflammable gas or dust)

Altitude

Under 1000m

Structure

Protective class

IP20

Cooling method

Fans cooling

Fans cooling

Wall mounting or standing