Parameter:

build in MPPT charge controller

Rotor Diameter: 46.1 in(1.17m)

Weight : 7.5KG

Shipping Dimensions : 24*15.7*7.5 in(600*400*20mm)

Mount : 1.5 in schedule 40 pipe 1.9 in (48.26mm)OD

Start-up wind speed : 2.8m/s

Output voltage : 12V/24/48V 

Rated power : 400W at 29mph(13m/s)

Max power: 550w
Turbine Controller : MPPT(Maximum Power Point Tracking) controller

Body : cast aluminum

Blades : 3-Carbon fiber composite

Overspeed Protection : Electronic torque control

Kilowatt Hours per Month : 40Kwh/mo at 12mph(5.5m/s)

Survival wind Speed : 112mph(50m/s)

Max Noise level (decibel) : 60db

Warranty : 3 year limited warranty

Details:

              

1,Blade

It is a real Carbon fiber material ,By Injection mould. Not a normal plastic .

They are very hard but light ,Easy to start up .it is a ral top-grade

blade.the blade warranty for this blade is 6 years

2.body

A whole Die casting aluminum ,Not screw by some nut like our competitor .

There is LED lighting on the body ,Show the working state .

The surface is power High temperature plastic spraying under 400 Celsius degree,It will suitable for marine and all other severe environment .

There is unique identity serial number for our after-sell service .

the body warranty is 15 Years

3,Nose

the wind turbine nose is also made of Carbon fiber with some plastic combine,There is three SUS304 M4x10 hexagonal screw ,It will never broken and blow off the hub

 

4,Generator

the wind turbine generator is made of SUS304 material .It will not rust .The magnets is Rare earth permanent magnet ,

wind generator warranty is 3 years

5,Controller

The wind turbine have a MPPT controller buit-in the body .

It is a full Intelligent controller,Voltage rise,auto brake,auto

unloading,12/24V auto distinguish,auto week up and so on ,It will protect

the generator and will have a good charge current even in a small wind

Have this controller ,You just connect it directly to your battery