Usage: 

The BGB-C Series High-efficiency Coating Machine is mainly used in pharmaceutical and food industries. It is a high-efficiency, energysaving, safe, clean and mechatronics equipment for coating tablets, pills and candies with organic film, water soluble film, slow and controlled release film and sugar film etc., which conforms to the requirement of GMP. 

Performance: 

1. The control system consists of PLC and HMI. The design is reasonable 
And programming is flexible, which are adapt to the different needs of pharmaceutical technology, thus featuring reliable work, stable performance and conforming to the requirement of GMP. 

2. Under the action of the agitation of streamline guide plate, the tablet cores are tumbling smoothly and exchanging frequently, thus elimination the phenomenon of tablet cores falling from a high place and the collide, so that solve the problems of broken pieces and chipped edged and also improve the rate of finished products. The narrow surface of the guide plate eliminates the adhesion of coating material on its surface, thus saving the coating material and improving the quality of medicine. 

3. The peristaltic pump with constant pressure and variable eliminates the need for a return pipe. The turning radius of the drum varies with the pressure. The slurry output and the quantity of slurry sprayed are balanced from plugging-up, and saving the coating material, moreover the cleaning is simple, without deed corner. 

4. The spray gun is specially designed for film coating machine with even atomization and large coverage of spraying. The universal adjustable spray head makes the cleaning mechanism of spray gun unaffected by charge quantity, so that coating can proceed continuously, thus reducing the coating time and saving coating material. 

5. Display and control the negative pressure in the coating drum 
We have set up a negative pressure detecting point in the upper box of the coating machine and installed a 2300-1kpa pressure differential gauge(made by the USA Dwyer Co) on the operating console, operator can operate the touch screen according to the technological specification (for instance, the negative pressure being 10PA), and control the speed of exhaust fan, so as to control the negative pressure in the drum. 

6. Display and control of the speed of heat-supply air 
We have set up an air-speed detecting point in the heat-supply air pipe and installed a 2001AV air speed gage(made by the USA Dwyer Co. )on the operating console, the operator can operate the touch screen according to the technologically specified air speed value(8m/s), so as to control the speed of hot air fan and meet the demand for air supply. 

7. Display and control of temperature value 
Temperature sensors are installed at the air inlet and outlet of the coating machine. After the temperature signal is inputted to the PLC and compared with the set value(90), the heat exchange is automatically controlled, thus achieving the control of coating temperature value.

Technical Parameters:

Model		BGB - 150 C
Production capacity (kg/batch)		150
Speed-adjusting range of filmcoating drum (rpm)		2 - 15
Motor power of main machine (kW)		2.2
Temperature-regulating range of hot air (° C )		Normal temperature  80 ° C
Filtration accuracy of hot air ( mm)		0.5 mm (100000 grade)
Motor power of air heater (kW)		1.1
Motor power of exhaust machine (kW)		5.5
Motor power of peristaltic pump (kW)		0.18
Overall dimension of main machine (mm)		1570×1260×2000
Weight of main machine (kg)		900
Overall dimension of air heater (mm)		1100×1150×2300
Weight of air heater (kg)		500
Overall dimension of exhaust machine (mm)		800×920×2080
Weight of exhaust machine (kg)		450
Power supply: 3-phase  5 wire		380V, 50A
Clean air	Pressure	>0.4MPa
	Air consumption	1m3/min
Water supply	Pressure	>0.15MPa
Steam heating
Steam	Pressure	>0.4 Mpa
	Air consumption	≤150kg/h
	Pipe diameter	1