C-1000T\C-1000T-V Lathe CNC Controller:
Control Axes: 5 axes(X\Z\Y\4th\5th) 4 axes simultaneously

C-580T Lathe CNC Controller:
Control Axes: 2 axes(X\Z) 2 axes simultaneously

C-1000T\C-1000T-V supports 5 feeding axes, 4 axes simultaneously and 2

Analog spindles

C-580T supports 2 feeding axes, 2 axes simultaneously and 1 analog Spindle

1ms interpolation cycle, 0.1um control precision

C-1000T\C-1000T-V: Two way 0V~10V analog output, supports 2 spindles

580T: One way 0V~10V analog output

Linear, exponential, and S-shaped acceleration and deceleration mode can be chosen

Multiple PLC, current PLC can be switched

C-1000T\C-1000T-V supports PLC on-line display, monitoring and real-time signal tracking

Statement-style macro programming, macro call with parameters

Metric/imperial Programming, auto tool setting, auto chamfering,
C-1000T\C-1000T-V supports tool life management too

Chinese/English interface selected by parameter

Supports alarm and operation history, easy to management

Multiple password protection levels

C-1000T and C-1000T-V support 36 inputs/36 outputs
C-580T supports 16 inputs/16 outputs

USB supports file operation and directly processing, system setting and

Software upgrading

Position Command Range:

Metric Input(G21): -9999.9999mm~9999.9999mm, Minimum input: 0.0001mm

Imperial Input(G20): -999.9999inch~999.9999inch, Minimum Input: 0.0001 inch

Electronic Gear: Command Clock Multiplier Factor 1~65536, Division Factor 1~65536

Rapid Traverse Speed: Max. 60m/min

Rapid Override: F0\25%\50%\100% four grade, real-time switch

Cutting Feed rate: Max. 15m/min(G94)or 500.00mm/r(G95)

Feed Rate: 0~150% sixteen grade real-time switch

Manual Feed Rate: 0~150% sixteen grade real-time switch

MPG Feed Rate: 0.001mm\0.01mm\0.1mm\1mm four grades

Single Step Feed Rate: 0.001mm\0.01mm\0.1mm\1mm four grades

Interpolation Method: Linear\Circular\Helical and Rigid Tapping Auto Chamfering

Commen Thread( Follow Spindle)/ Rigid Thread

Single/ Multiple Thread by Metric or Imperial\Tapper Thread and End

Thread, Constant Pitch Thread, ES-1000T\ES-1000T-V supports Varialbe pitch Thread too

Gewindeauslauf length\angle and speed can be set

Pitch: 0.01mm ~ 500mm or 0.06 teeth per inch~ 2540 teeth per inch

Cutting Feeding Acceleration and Deceleraton:
Linear type, S type or Index type

Rapid Traverse Acceleration and Deceleraton:
Linear type, S type or Index type

Thread Cutting: Linear or Index type

The starting speed, finishing speed and time of acceleration and

Deceleration are set by the parameter

Manual and MPG are control by afterward acceleration and deceleration
MPG supports immediate stop or full run mode.

Rapid positioning supports straight line or fold line

C-1000T, C-1000T-V supports two way 0V~10V analog output and double spindle control

580T supports one way 0V~10V analog output

Spindle Encoder: Lines can be set between( 100 p/r~5000p/r)

Gear Ratio between encoder and spindle: (1~255): (1~255)

Spindle Override: 50%~120% totally 8 grades real-time switch

Spindle constant surface speed control

Rigid Tapping