GSK980TDb Lathe CNC controller system from CNCmakers Limited.

GSK980TDb(Upgraded from GSK980TDa) CNC Turning center/lathe controller: 2 Analog spindle plus 5 feed axes (including C axis), LCD with graphics display, 0.001mm distinguishability, PLC ladder program, 2 axes line/ arc interpolation, DNC communications

1-Five axes of X, Z, Y, 4th and 5th control, the axial name and type of Y, 4th and 5th can be defined.
2-2ms interpolation cycle, precision of 1um or 0.1um can be selected.
3-Maximum speed 60m/min (When it is 0.1um, the maximum speed is 24m/min).
4-Adapted servo spindle can realize spindle continuous position, rigid tapping, rigid screw processing
5-Built-in many PLC programs, the current running PLC program can be selected
6-G71 command supports the cycle cutting of groove shape outline
7-Support the programming of macro command in sentence type and the calling of macro program with parameter.
8-Support programming in metric system/inch system, with function of auto tool-setting, auto chamfering, tool life management.
9-Display in Chinese, English, Spanish or Russian, which is selected by parameter.
10-With USB interface, it supports file operation in flash disk, system configuration and software upgrade.
11-Analog voltage output of 0V~10V in two channels, support double spindles
12-Electrical MPG input in one channel, it supports hand electrical MPG.
13-Common input in 40 points/common output in 32 points
14-Overall installation dimension and the command system are completely compatible with GSK980TDa.
15-Number of control axes
16-Number of control axes: Five axes (X, Z, Y, 4th and 5th )
17-Number of linkage axes: Three axes
18-Number of PLC control axes: Four axes
19-Feeding axes function
20-Minimum command unit: 0.001mm or 0.0001mm is selectable
21-Position command range: ± 99999999 × Minimum command unit
22-24m/min Rapid traverse speed: When the command unit is 0.001mm, the maximum speed is 60m/min. 0.0001mm, the maximum speed is 24m/min.
23-Rapid override: Total four levels: F0, 25%, 50% and 100%, real-time adjusting
24-Feeding override: Total 16 levels: 0~150%, real-time adjusting
25-Interpolation mode: Interpolation of linear, arc (support arc interpolation of three points), thread, ellipse and parabola and rigid tapping.
26-Auto chamfering
27-Thread
28-Common thread (follow the spindle)/rigid thread
29-Single-headed/multiple thread of straight, taper and terminal surface in metric system/inch system, equal and variable pitch thread
30-Thread retraction length, angle and speed characteristics can be set
31-Thread pitch: 0.01mm~500mm or 0.06 tooth/inch~25, 400 tooth/inch
32-Acceleration and deceleration function
33-Cutting feeding: Linear type or index type is selectable.
34-Rapid traverse: Linear type or S typeThread cutting: Linear type or index type is selectable.
35-The starting speed, finishing speed and time of acceleration and deceleration are set by the parameter.
36-Spindle function
37-Analog voltage 0V~10V output in two channels, support two-spindle control.
38-Spindle encoder feedback in one channel, the resolution of spindle encoder can be set(100p/r~5000p/r).
39-The transmission ratio between encoder and spindle is: (1~255): (1~255)
40-Spindle speed: It is set by S code or PLC signal, the speed range is 0rpm~9999rpm.
41-Spindle override: Total 8 levels: 50%~120%, real-time adjusting
42-Spindle constant surface speed control
43-Rigid tapping
44-Tool function
45-Tool length compensation