Pv Module Poly Crystalline Solar Panels  

 

No.1 Parameter   of Product:

Module Type	HSPV235Wp-156-60P	HSPV240Wp-156-60P	HSPV245Wp-156-60P	HSPV250Wp-156-60P
Maximum power at STC (Pmax)	235w	240w	245w	250w
Maximum power voltage (Vmp)	29.7	29.8	29.9	30.0
Maximum power current  (Imp)	7.91	8.05	8.19	8.33
Open circuit voltage (Voc)	35.8	36.0	36.2	36.4
Short circuit current  (Isc)	8.70	8.72	8.86	9.03
Nominal Operating Cell Temperature	45 ± 2℃
Temperature coefficients of Isc	+0.049% /℃
Temperature coefficients of Voc	-0.340% /℃
Temperature coefficients of Pmax	-0.430% /℃
Standard Test Conditions  (STC)	Irradiance 1000W/m2, Module temperature 25℃, Air Mass (AM)=1.5
Power Production Tolerance	± 3%

No.2 Characters: 

 

1. High cell efficiency with good-quality crystal silicon materials.

2. Long-term stability and reliability. 
3. High transmit , low-iron tempered glass with enhanced stiffness and impact resistance. 
4. Unique frame designed with high mechanical strength for easy Installation and durable requirement

5. Advanced encapsulation materials to provide efficient protection from various environmental conditions.

 

No.3 Quality and Warranty:

 

 1. Peak power of each solar panel in guaranteed : +-3%power tolerance. 
2. Average power of solar panel in single order is guaranteed not less than the peak power 
3. Rigorous quality control meets the highest international standard 
5. 5 years limited warranty on material and workmanship 
6. 10 years and 20 years limited warranty for minimum power output. Detailed information, will check gaurantee book.

 

No.4 Solar cells applications: 
1. Any large or small on-grid or off-grid solar power stations. 
2. Commercial and industrial building roof-top systems 
3. Residential roof-top systems 
4. Any commercial or industrial ground mount systems 
5. Other industrial or commercial applications