1 Introduction
Oxygen+Gasoline Cutter is a flame metal cutting machine using oxygen plus traditional gasoline to cut metal with thickness up to 300 mm. There is no need to use expensive and dangerous acetylene, LPG, LNG, etc.

Compared with oxygen+acetylene cutting, Oxygen+Gasoline Cutter is 85% cost saving. Compared with oxygen+liquefied petroleum gas(LPG) or liquefied natural gas(LNG) cutting, Oxygen+Gasoline Cutter has faster cutting speed and 30% lower oxygen consumption.

2 Advantages
2.1\Cost effective
2.5 liters gasoline is equal to one cylinder of acetylene.

2.2\Fast cutting speed
At 20 degree ambient temperature, cutting 20mm thickness steel plate, the cutting speed of Oxygen+Gasoline Cutter is 550mm/min, faster than using oxygen with LPG.

2.3\Good cutting quality,
Using this cutter, the cutting notch is flat and narrow. There is no scar on cutting edge.

2.4\Safe and reliable
PETROXY manual cutter has higher safety performance than acetylene and other gases. The petrol tank is filled with military grade explosion proof material, no possibility of fire burning back to tank or tank explosion.

2.5\Wide applications
Our PETROXY manual cutter can be used to cut all material which can be cut by acetylene + oxygen cutting.

2.6\Environmental friendly
PETROXY manual cutter has no pollution, no noise. No electricity or heat energy is needed. It is cost saving and no harm to operator. It has same operation method with acetylene+ oxygen cutting, operator can use it easily, it is the best replacement product to get rid of acetylene.