Safety precautions:

a)   When the solar photovoltaic SPD is installed in final system, it must achieve all the requirements of GB4943 (EN60950, IEC60950) standard;

b)   The equipment has to be installed by authorized professional person, before installation, to cut off power supply, and prohibit hot-line work from accidents

 

Application

AM type DC photovoltaic series power SPD is often used to prevent over-voltage and transient over-voltage from damaging DC power system and equipments, especially in photovoltaic solar power system.

 

Features:

1)  Temperature control circuit break technology, built-in over-current protection circuit, to completely keep away from fire disaster

2)  International famous components and advanced manufacturing technique

3)  Big discharger current capacity, low residual voltage

4)  Remote alarm connect point (optional)  

5)  Clear and intuitive working condition

6)  Easy installation and maintain

7)  Exquisite process, can work under the hostile environment for a long time, like acid, alkali, dust, salt fog, wet, etc

 

Specification

 

Model	AM40-1000
Max continuous operating voltage(Uc)	1000VDC
Nominal discharge current(kA)	20KA
Max discharge current(kA)	40kA
Protected level	3200V
Response time	≤25ns
flameretardantrating(UL94)	V0
Protection Level	IP20
Dimension(mm)	90*54*69mm
Connecting diameter(mm2)	10mm2above
Working conditions	Temperature:－40～＋85℃; Relative humidity:≤95％(25℃); Elevation≤3km
Note: For latest information, please contact ANSUN company

 

Product installation diagram

Installation

1)  35mm slide guide installation way

2)  Connect +/- and ground terminal of power system to +/- and ground terminal of SPD, then screw up the bolts

3)  ground line of SPD to lightning protection system ground device

4)  After wiring, please check it until everything is going well, to put into operation.