Safety precautions:

a)   When the SPD box is installed in final system, it must achieve all the requirements of GB4943 (EN60950, IEC60950) standard;

b)   The equipment has to be installed by authorized professional person, before installation, to cut off power supply, and prohibit hot-line work from accidents  

Function and theory

AJ2CH type 2 in 1 SPD, integrated by Power SPD, network signal SPD, is used to protect surveillance system sensitive to electromagnetic interference, from damaging by lightning induced voltage, power interference and electrostatic discharge.

 

Application

1)   The device (power cable, net cable) of surveillance system

2)   Bank surveillance system and housing district safety system

3)   School, enterprise and road safety protection

 

Feature

1)   Camera power + network multi stage protective circuit

2)    International famous core component brand

3)    High discharge current capacity, low insertion loss, superior transmission performance, no leakage current

4)    Low residual voltage, perfect protective effect

5)   Quick response, stable performance, reliable working

6)   Small size, easy installation

Specification

Product model	AJ2CH-24
1. power specification
Max continuous working voltage (Uc)	24V AC
Nominal discharge current (In)	5KA
Max discharge current (In)	10KA
Protection level	≤100V
2. net specification
Max continuous working voltage (Uc)	5V
Nominal discharge current (In)	5KA
Max discharge current (In)	10KA
Protection level	≤25V(core wire—case/ground)
Data transmission rate	≤1000Mbps
Insertion loss	≤0.5dB
Interface type	RJ45
3. other specification
Case	Aluminum material, oxidation surface(black, silver)
Dimension	100*55*28mm (including interface)
Wire interface	Power supply	Compression joint port, suitable for 16-26AWG(0.15-1.3mm2) wire
	net signal	rj45 connector
	Ground	Earth wire terminal or 2.5mm2earth wire
Installation	Inside of box or cabinet
Working conditions	Temperature:－40～＋85℃; Relative humidity:≤95％(25℃); Elevation≤3km
Note: For latest information, please contact ANSUN company

 

Installation and wiring

1)  According to protection demands, the SPD is connected by series between protected devices and signal path, the closer the distance to protected devices, the better the protection effect.

2)  To connect separately a)the cable to the input terminal of power, net port, b) output terminal of SPD power, net to related interface of protected devices, c) ground line of SPD to earth wire of lightning protection system

3)  After wiring, please check it until everything is going well, to put into operation.