Application

1)   Computer network SPD is used in over-voltage protection from lightning and EMP of network equipments, like 10/100/1000Mbps SWITCH, HUB, ROUTER, etc

2)   Network computer room switch

3)   Network computer room server

4)   Other network interface devices

5)   24 channel integration SPD box is mainly applied in comprehensive network cabinet and switch cabinet

 

Features

1)  Multi stage protective circuit, low residual voltage

2)  Low insertion loss, quick response

3)  Precise limiting voltage, high discharger current capacity 

4)  Micro-strip PCB design, good isolation, low interference

5)  Standard 19 inch integrated 24 channels network signal SPD box

6)  Stable performance, reliable work

7)  Easy installation

 

Specification

Model	AS05J
Max continuous operating voltage(Uc)	5VAC
Nominal discharge current(kA)	3KA
Max discharge current(kA)	5kA
Protection level(Up)	Line to line	≤15V
	Line to ground	≤50V
Transmission rate	100Mbps
Insertion loss	≤0.5 dB
Interface type	RJ45(F)
Protection form	1/2, 3/6
Channel	1
Dimension	68*25*25mm
Protection Level	IP20
Installation	Series
Working conditions	Temperature:－40～＋85℃; Relative humidity:≤95％(25℃); Elevation≤3km
Note: For latest information, please contact ANSUN company

 

Installation and wiring

a)  SPD is connected by series between protected devices and signal path

b)  The input side of SPD connects to signal path, output side connects closely to protected device,

c)  To connect ground line of SPD to lightning protection system ground device, lower connecting wire is better, within 1m