Extremely Low Back Drive Friction
Bypass Valve & Reservoir Mounted directly on Cylinder
Pump Set Mounted Remotely – Enabling Maximum Noise Suppression
Standard Pump Set Hose Length = 6 ft – 2 metre (custom lengths available)
Available in Kit Form - Enabling Installer Configuration
Pump Set Includes Shut Off Valve – Enabling Removal for Service
When the autopilot is not in use the cylinder runs freely along with the rudder. When the automatic pilot is in use a solenoid valve on the actuator closes and locks the cylinder. Steering signals from the pilot are now fed to the D.C. motor, which drives the pump to move the cylinder back and forth. De-energized, the solenoid valve immediately disconnects the automatic pilot from the rudder.

The actuator has a small translucent oil reservoir, making it easy to check fluid levels. These actuators have only five moving parts. Mechanical simplicity gives our product reliability and ease of service when compared to complicated gear and screw actuators, making our units a favorite for offshore mariners. These actuators are shipped from our factory completely filled with oil and require no additional plumbing.

Benefits of the Octopus Reversing Pumps
Piston pump technology giving higher efficiency and accuracy Fewer moving parts giving increased reliability Variable flow rate to make sure the pump is matched as accurately as possible to the manual steering system Professional cut off valves for simple servicing.