WIFI/INTERNET/WLAN/IPhone Infrared Touch Screen Fan Coil/Heating Room Thermostat BAC-002WF
The function for WIFI will enter into the market from April, 2014.
Other functions such as RS485 are already finished. Welcome your order!

WIFI/INTERNET/WLAN/IPhone Infrared Touch Screen Fan Coil/Heating Room Thermostat BAC-002WF 
Application:
BAC-002  fan coil controller is used in industrial and commercial temperature control system, it is used to control 
fan coil (optional control function for motorized valves). Suitable for 2-pipe and 4-pipe configuration.  Heating, 
cooling and ventilation mode and Fan Speed "HI", "MED" "LOW" or "AUTO" mode can be controlled.

WIFI/INTERNET/WLAN/IPhone Infrared Touch Screen Fan Coil/Heating Room Thermostat BAC-002WF TECHNICAL DATA
Sensing element: NTC 
Temperature-Controlled Accuracy: ±1C   
Temperature-Displayed Accuracy: ±0.5C   
Temp. Setting Range: 5.0C - 30.0C 
Temp. Measurement Range: 0 C - 55.0C 
Ambient Temp.: 0 C - 45.0C 
Ambient Humidity: 5 ~ 95% RH (Non condensing) 
Key: Capacitive touch screen 
Power Consumption: < 2W 
Power Supply: AC85~260V, 50/60Hz 
Wire terminals: connect wire 2 x 1.5 mm2 or 1 x 2.5 mm2  
Switch current rating:  2A Resistive (1A Inductive) 
Enclosure: Fire retardant PC +ABS  
Dimension: 86 x 86 x15.8 mm (L x W x H) 
Hole pitch: 60mm(standard) 
Protection Class: IP30 

WIFI/INTERNET/WLAN/IPhone Infrared Touch Screen Fan Coil/Heating Room Thermostat BAC-002WF FUNCTIONAL DESCRIPTION
Infrared approaching sensor:  
Breath Thermostat can detect human body's approach automatically when the distance within 5cm. The  
Backlight will light up and the thermostat goes to operation status. When the human body leaves it for 10 
seconds, it will go to standby mode and just show room temperature. "  " will keep flashing.  
 ECO Energy Saving Setting:  
Touch    to entry ECO mode under operation mode. The setting temperature will be 26°C with low fan , 
speed under cooling mode, and the setting temperature will be  18°C with low fan speed under heating mode. 
Touch  "  " again to exit ECO mode.  
FCU lntelligent Control:  
ON/OFF  Press" ''  for 2 second to turn on and display operation status. Press"  " again for 2 
seconds to turn off the thermostat and outputs.  
Operation and Standby mode: under operation mode, if nobody operate the thermostat for 10 second, it will go 
to standby mode and just display room temperature. ''  " will keep flashing. When someone is close to  
the thermostat, it will automatically go back to the operation mode.  
Setting temperature: Press" > "to reduce set-point, pressn   to raise set-point by  0.5 °C each step.  
Mode Selection: Press" M " to change system working in cooling '' ''  heating" " or ventitation"  " 
mode.  
Fan Speed Selection:  Press  :''   "to change fan speed among  (Hi)   (Med)  (Low) or 
flashing means Auto, Under auto fan speed   , the fan-speed changes automatically. Auto LOW-speed 
When the difference between room-temperature and set-point exceed 1°C,  Auto MED-speed When exceed 2°C, 
Auto HI-speed When exceed 3°C. 
Self-learning Function:  
Turn on the self-learning function, thermostat Breath would gradually "learn" your habits during your usage,  
and automatically correct your programming schedule to  pre-cool or pre-heat.  
 7 Days 4 Periods Programmable:  
7 Days 4 Periods Programmable Function: one week is divided into 7 days with four periods in each day,  
each temperature can be set separately to meet the user's different room temperature need in different time 
periods.  
Power On: Press "  " for 3 seconds to enter 7 days 4 periods programmable setting mode. press"   "  
again to select the clock and temperature of 7 days 4periods programming, by pressing  '' <" or '' > '' to  
adjust the parameters. Factory defaults: Set temperature is 25°C for the period of  7:00 ~ 8:00, 25°C for 8:00 
~18:00, 25°C for 18:00~21:00, 25°C for 23:00~6:00.