Place of Origin: | China (Mainland) |
---|---|
Brand Name: | PERMANENT |
Model Number: | EG2000 |
Usage: | |
Phase: | |
Current Type: |
Quick Details
Specifications
Specifications
1.EG2000 Electronic Engine Governor Controller
2.Good quality and competitive price
Universal Electronic Engine Governor Controller
The EG2000 is a universal generator governor / engine speed controller equipped with Smoke Limiting, & Idle Speed. Suitable for diesel, gas and natural gas engines with Built-in & Non-Built-in PTs Pumps, also can be used with Low Current, Electric over Hydraulic Oil Pumps Type Governor Actuators.
* Use for reference purpose only, not a genuine Barber Colman product
Features
Works on a wide ranges of MPU/flywheel frequencies
15Amp Max Output
Suitable for all types of diesel and Gas engines
High Sensitivity and stable at Low Frequency Variations
Moisture, vibration, and rust protected, Epoxy encapsulated electronics
For Use With Isochronous Generators & Automatic Paralleling PLC controls
Idle Speed Adjustment and connections for a Remote Speed POT
Specifications
Operating Voltage 10 VDC to 30 VDC
Output Current From 0.5 Amp to 15 Amp
Frequency Range 600 Hz ~ 9500 Hz (PMG Signal)
Idle Speed Frequency Adjustable From 30~85% of normal
Speed Band ± 0.25% at Steady State
Temp. Stability Between -40~85 °C Better than ± 0.5%
Remote Speed Adjustment Range (2 mode) Adjustable Range ± 5% with 5 KΩ potentiometer
Ramp Time 3 to 20 Sec. Adjustable
Operation Environment
Vibration 3G @ 100~2KHz
Relative Humidity Maximum 95%
Operation Temp. -40~85 °C
Storage Temp. -40~85 °C
DIP Switch Description
SW1 : ON 600~1200Hz
SW2 : ON 1200~2500Hz
SW3 : ON 2500~5000Hz
SW4 : ON 5000~9500Hz
Governor Controls DROOP : Droop Rate Adjustment
GAIN : MPU Output Gain Adjustment
Int. : Engine Stability Adjustment
RAMP-TIME : Soft Start Adjustment
SPEED : Speed Adjustment
IDLE : Idle Speed Adjustment
Dimension 147.0 (L) x 114.0 (W) x 40.0 (H) mm
Weight 690g ±2%