|
DMB-9010 IP Professional Receiver supports DVB-S, DVB-C, DVB-T, DVB-S2 and DS3standard. The products can receive and demodulate DVB-S/C/T/S2 digital TV signals. The receiver has two DVB-CI interface to support various kinds of CA system. In addition, DMB-9010 IP can decode MPEG-2 audio and video and output the analogue audio and video via embedded MPEG-2 decoder and A/V encoder. DMB-9010 IP Professional Receiver support IP input /output, remote control and parameter config. Which can be used in various kinds of digital television headend system.
|
|
1.2 Main Features
|
|
1) Fully comply with DVB and MPEG-2 standards
|
|
2) Common Interface with 2 slots (PCMCIA) that can support the encrypted systems of Irdeto, NDS, Viaccess and so on.
|
|
3) Support multi-descramble function, it is depends on the CI module
|
|
4) 2 slots of PCMCIA Module could descramble multi program and stream
|
|
5) Support professional Audio/Video interface output and ASI output
|
|
6) Support ASI input,the un-decrypted programs could loop through to another DMB-9010 IP IRD for further decrypting
|
|
7) Support TS over IP input and output.
|
|
8) User-friendly OSD and easy-to-use menu system
|
|
9) User programmable various satellite & transponder information
|
|
10) Automatic network search for newly added channels/programs
|
|
11) Stores up to 2000 channels
|
|
12) SCPC/MCPC receivable from C/Ku band satellite
|
|
13) VBI Teletext support
|
|
14) Antenna positioning help feature
|
|
15) Automatic PAL/NTSC conversion
|
|
16) Automatic last channel saving
|
|
|
|
1.3 Specifications
|
|
QPSK Input
|
|
1) Input Frequency Range: Ku & C-band 950MHz ~ 2150MHz
|
|
2) Input Level:-65dBm ~ -25dBm
|
|
3) Symbol Rate:2MB~45MB (SPTS or MPTS)
|
|
4) Rolling coefficient:0.35
|
|
5) FEC 1/2, 2/3, 3/4, 5/6, 6/7,7/8
|
|
6) Interweave depth:I=12
|
|
7) Polarization:0/13V/18V(optional)
|
|
8) Connector:F,75ohm
|
|
QAM Input
|
|
1) Input Frequency Range:48-858 MHz
|
|
2) Input Level:-20~-70dBm
|
|
3) Symbol Rate:1-7MBauds
|
|
4) Demodulation:16/32/64/128/256 QAM
|
|
5) Bandwidth:6/ 7 /8 MHz
|
|
6) FEC code rate:1/2, 2/3, 3/4, 5/6, 7/8; K=7
|
|
7) Connector:F,75ohm
|
|
COFDM Input
|
|
1) Input Frequency Range:174-230MHz,470-862 MHz
|
|
2) Input Level:-20~-70dBm
|
|
3) FFT:2K/8K
|
|
4) Guard interval:1/4,1/8,1/16,1/32
|
|
5) Constellation:QPSK,16QAM,64QAM
|
|
6) Bandwidth:6/7/8MHz
|
|
7) FEC:1/2,2/3,3/4,5/6,and 7/8
|
|
8) Connector:75 ohm, F
|
|
DS3 input(optional)
|
|
1) Maximum Input code rate:44.736Mbit/s
|
|
2) Format: Unframed Framing according to G.804/G.752(DS3)
|
|
3) Connector:BNC,75 ohm
|
|
DS3 loop through output(optional)
|
|
1) Maximum Input code rate 44.736Mbit/s
|
|
2) Format Unframed Framing according to G.804/G.752(DS3)
|
|
3) Input impedance 75 ohm
|
|
4) Connector BNC
|
|
Output
|
|
1) 2 ASI output at the same time, can cascade the MPEG TS
|
|
2) LNB input and output Signal input, loop through output
|
|
3) Analogue AV format PAL, NTSC, SECAM, BNC connector
|
|
4) AV RCA
|
|
5) AV RCA*2
|
|
|
|
SDI output
|
|
1) Connector:75Ω, BNC-Female
|
|
2) Maximum data rate:100Mb/s
|
|
3) Signal level:800mVpp±10%
|
|
|
|
TS IP Input/Output
|
|
1) Connector:RJ45 100Base-T
|
|
2) Maximum output bit rate:70Mbits/s
|
|
3) UDP/RTP
|
|
4) IGMPV2
|
|
|
|
Mechanical Parameter
|
|
1) Voltage: AC 90~260 V 50/60 Hz
|
|
2) Power: 30 W
|
|
3) Operational temperature: 0~50°C
|
|
4) Storage temperature: -10~70°C
|
|
5) Dimension: 300mm(W)×430(L)mm×45mm(H)
|
|
|
|
6) Weight: 5kg
|
