Specifications Dirty lube oil cleaning equipment 
1.removes water, air, gas and particles 
2. restore oil viscosity and flash point 
3. CE/ISO 

Dirty lube oil cleaning equipment remove air,gas, moisture, solid impurities, safe operation, CE/ISO approval

Application:

Applied for Unqualified Lube Hydraulic Oil, Especially for those contain high value of acid.

Features & advantages:

1. Breaking emulsification thoroughly by Adopting high-molecule material, After treatment, the oil is very difficult to be emulsified again.

2. Adopting The combination of coalescing separation and vacuum duplex 3D Stereo-Evaporation, Eliminating Water.

3. High Oil Cleanness after treatment-----can be reach NAS 6 Grade (NAS 1638)---With Zhongneng's unique Technology, can remove impurities completely by Double FH Trapezoidal filt element and high-molecule absorbing together.

4. Deep & highly precise FH rectangle filtering System.

5. With the advanced technology to absorbing impurities---by high molecule.

6. Can be work on-line without person.

7. Regeneration device could effectively remove polar materials such as acid, free carbon and so on.

Working Principle

 When it starts working, the used oil will be poured into the heater to heat under the vacuum pressure, then the heated oil enter into the primary filter which will eliminate the big impurities, then the oil enter into the vacuum separator, the oil will flow the special radiation device, which make the unit/volume oil to produce a large surface area, lets the pollution oil exposure in the low humidity atmosphere, thus the water, air and gas can be eliminated.   The treated vapor and gas form the gaseous mixture becomes the liquid through the water tank and the chiller condensation, then the liquid enters water receiver together, the vacuum extracts the surplus gas.

 

The oil which is drained away water flow into precision strainer where can exhaust particulates (oil purification). According the quantity of the water content, a whole purification needs many times circulation to drain away the water.  

 

 

Technical Parameters:

Index name	Unit	TYA-10	TYA-20	TYA-30	TYA-50	TYA-100	TYA-150	TYA-200	TYA-300
Flow rate	L/H	600	1200	1800	3000	6000	9000	12000	18000

 

 

 Oil Data after Treatment