VENZO 8160 Shaker Control System
State-of-the-art Hardware
-
2~16 Analog input channels
-
1~2 Drive Channel (can be adopted in 2-axis control application)
-
450MHz DSP Processing
-
100 Mbps Ethernet port connecting to PC (without grounding problem)
-
-30~70℃Working Temperature
-
No-fans structure to reduce the background noise
-
160 dB / Octave Anti- aliasing Filter
-
1 AUX Channel
-
24-bit ADC/DAC, 130dB dynamic range
-
204.8 kHz Sampling Rate, 40kHz Frequency Range
-
1GB Internal Flash Memory Stores Test Configuration
-
Floating Ground Design Reduces Ground Loop Problems
Full and Innovative Control Functions
-
Random
-
Random-on-Random
-
Sine, Step Sine, Resonance Search and Tracked Dwell
-
Sine and Random-on-Random
-
Classical Shock, Transient Time History, SRS
-
Field Data Replication
-
Sine-on-Random
-
Kurtosis Control
-
Sine-on-Sine
-
Limiting and Notching
-
Multivariable Control
Analysis Capabilities and Auxiliary Functions
-
THD Detection
-
Data Recorder
-
FFT Analysis
-
SRS Analysis
-
FRF
-
Waterfall View
-
Signal Calculation
-
Signal Cache
-
Signal Editor
-
Word/PDF Test Report
-
Email Report
-
Off-line view
-
Transient Capture, Force/Deflection Analysis, Shock Response Analysis
|
Hardware Specifications
-
Input: 2~16 channels
-
Input Interface: BNC Connector
-
Input Resolution: 24-bit ADC
-
Coupling: AC Gnd, AC Dif, DC Gnd, DC Dif, Charge, IEPE
-
TEDS: IEEE 1451.4 compliant, automatic-reading
-
Anti-aliasing Filter: analog and digital anti-aliasing low-pass filters
-
Input Dynamic Range: 135dB
-
SNR: > 100dB
-
Input Voltage Ranges: ±10, ±1 or ±0.1 VPEAK
-
Input Impedance: 1MΩ(Single-ended)2MΩ(differential)
-
Input Protection Voltage: ± 36VPEAK without damage
-
Input Channel Crosstalk: <-100dB@1kHz
-
Amplitude Channel Match: 0.1 dB
-
Channel Phase Match: better than ±1.0 degree, up to 20 kHz
-
Input Signal Type: Charge, Voltage, High-integrated
-
Input / Output Channel Crosstalk: <-100dB
-
Total Harmonic Distortion: <-100dB
-
Frequency Accurancy: as fine as 0.000001Hz
-
Output:1~2 Drive Channels
-
1 AUX Channel: can be adopted in 2-axis control application
-
Output Interface: BNC Connector
-
Output Resolution: 24-bit DAC
-
Max. Sampling Rate: 204.8kHz
-
Frequency Range: 80kHz
-
Dynamic Range: ≥108dB
-
Output Voltage Range: 10V F.S
-
Max Output Current: 20 mA
-
Total Harmonic Distortion: <-100dB@1kHz
-
PC Configuration: Windows XP/Vista/ 7 /8 Operating System and an Ethernet port.
Microsoft Word / Excel and PDF are recommended.
Main Classis
-
Dimension (mm): 290*210*60 (VENZO 820); 390*280*60 (VENZO 880); 430*280*60 (VENZO 8160)
-
Weight: 2.6 kg (VENZO 820), 4.2 kg (VENZO 880), 5.0 kg (VENZO 8160)
-
Front-end Panel: three LED lights indicate the status of "Power", "Ready" and "Control". The red Abort button is for emergency stop of the vibration test system.
-
Rear Panel: connectors include 2/8/16 Analog Input Channels, a Drive Channel, a100 BASE-T Network Port, an AUX channel (only for VENZO 880, can be adjusted to 2-axis drive control channel), a grounding-end, an External Emergency Abort Jack and a terminal block of digital I/O lines.
-
Working Temperature: -30~70℃
-
Humidity: 5%~95% RH
-
Consumption: 10W (VENZO 820), 20W (VENZO 880)
-
Power: 100～240VAC(50～60Hz)
-
Enclosure Rating: IP43
-
PC Connection: high-speed standard Ethernet interface
-
Anti-vibration Performance: 10-60 Hz @ 0.15 mm peak; 60-150 Hz @ 2 gn, conform to IEC 60068-2-6;
-
Anti-impact Performance: 10 gn for 16 ms, conform to IEC 60068-2-27
-
In Accordance with EMC Standards: EN61326-1:2006, EN61000-3-2:2006+A1:2009+A2:2009, EN 61000-3-3:2008
-
Safty: EN 61010-1:2001
-
Compliance: CE Marking
|
