| Model Number: | VENZO 640 |
|---|---|
| Brand Name: | VENZO |
| Place of Origin: | Hong Kong |
Quick Details
Specifications
VENZO 640 Shock Test System
Features
VENZO 640 shock test systemis the tailored instrument for drop tester, shock tester and bump testing machine. It allows the test engineer to acquire any transient event such as drop test, crash test or shock pulses.When the external input match the defined trigger conditions- trigger level, slope and position, VENZO 640 will trigger to capture the transient event and display the pulse graphics, and additional SRS analysis gives the instant estimation of the potential damage. A series of pulses can be captured and in the mean while throughput to disc in a continuous data stream for post-analysis.VENZO 640 can also control the shock machines' movements as specific requirements of customers.
- Capture transient signals with specified trigger level, slop and position
- 100Mbps Ethernet port connection
- Capture Duration: 1ms-10,000ms
- Pulse Duration: 0.05ms to 5,000ms
- Maximum sampling rate up to 204.8 kHz
- Acceleration range up to 100,000gn
- Standard: MIL-810 or user defined
- Specified SRS analysis for each pulse as it is captured
- Independent low-pass or high-pass filter for each channel
- Auto generation of test report in Word or PDF format
| Input | 4 channels |
|
| Input Interface | BNC Connector | |
| Input Resolution | 24-bit ADC | |
| Coupling | AC Gnd, AC Dif, DC Gnd, DC Dif, Charge, IEPE | |
| TEDS | IEEE 1451.4 compliant, automatic-reading | |
| Anti-aliasing Filter | analog and digital anti-aliasing low-pass filters | |
| Input Dynamic Range | 135dB | |
| SNR | <-100dB | |
| Input Voltage Ranges | ±10, ±1 or ±0.1 VPEAK | |
| Input Impedance | 1MΩ(single-ended)2MΩ(differential) | |
| Input Protection Voltage | ± 36VPEAK without damage | |
| Input Channel Crosstalk | <-100dB@1kHz | |
| Amplitude Channel Match | 0.1 dB | |
| Channel Phase Match | better than ±1.0 degree, up to 20 kHz | |
| Input Signal Type | Charge, Voltage, High-integrated | |
| Input / Output Channel Crosstalk | <-100dB | |
| Total Harmonic Distortion | <-100dB |
| Dimension (mm) | 290*210*60 |
| Weight | 2.6 kg |
| Working Temperature | -30~70℃ |
| Humidity | 5%~95% RH |
| Consumption | 10W |
| Power | 100~240VAC (50~60Hz) |
| Enclosure Rating | Ip43 |
| PC Connection | high-speed standard Ethernet interface |
| Anti-vibration Performance | 10-60 Hz @ 0.15 mm peak, 60-150 Hz @ |
| 2gn, conform to IEC-6008-2-6; | |
| Anti-impact Performance | 10 gn for 16 ms, conform to IEC-6008-2-27 |
| EMC Standards | EN61326-1:2006, EN61000-3-2:2006 |
| +A1:2009+A2:2009, EN 61000-3-3:2008 | |
| Safety | EN 61010-1:2001 |
| Compliance | CE Marking |
Trigger
Ideal Waveform
SRS Analysis
Filtering
Shock Response Analysis
Force/Deflection Analysis
Rotational Shock Analysis
FFT Analysis
| Trigger Channel | Any active channel, specified channel ornone |
| Trigger Slope | Rising, Falling and Bi-slope |
| Trigger Level | Specified G level |
| Delay | -100%-100% |
| Waveform | Half-sine, Initial/Final peak sawtooth, Triangular,Rectangular, Trapezoid, Haversine |
| Standard | ISO, MIL-STD-810G, IEC, User defined |
| Tolerance | According to each standard |
| Analysis Target | Ideal Waveform or set SRS manually |
| SRS type | Primary, Residual, and Composite |
| Resolution | 1-1/48 octave analysis |
| Damping Ratio | 0.1%-99% |
| Q factor | 0.5-500 |
| Low-pass and high-pass filters, specified cutoff frequency and filter ratio. Filters are independent for each channel. |
| Specified arbitrary frequency and damping ratio, generate its impact response signal. | |
| SR Visualizer | 2D pulse animation from high to low frequency |
| 3D pulse animation from high to low frequency | |
| Replay 3D pulse animation from high to low frequency | |
| Calculate and display Force/Deflection curve, Ideal Energy, Input Energy, Absorbed Energy, Lost Energy and Efficiency. |
| Set the turning radius, calculate angular acceleration time-domain signal. |
| Calculate FFT signal of each channel. |