ArChine Comptek FPC 32
Food Grade Compressor Oil

NSF Registration No. 147703  Place of Origin:Shanghai,China

 

GENERAL:

ArChine Comptek FPC 32 is custom-blended with synthetic base fluids and special additives to provide excellent protection against wear and outstanding cold-temperature fluidity. It offers excellent performance in a wide range of temperatures including sub-zero temperatures. It also offers excellent water separation as well as rust, corrosion, deposit and water-washout resistance to protect components. In addition, it resists fling-off and is designed to remain on the chain for maximum lubrication and protection.

ArChine Comptek FPC 32is long life lubricant and recommended for use in screw compressors,evaporators and spiral freezers operating at extremely low temperatures including cryogenic-freezing temperatures.

ArChine Comptek FPC 32 meets USDA H-1 requirements for incidental food contact and complies with requirements for FDA 21 CFR 178.3570.

ATTRIBUTES

l        Very high viscosity index for enhanced lubrication and superior protection at low temperatures

l        Excellent film strength and anti-wear properties

l        Outstanding cold-temperature fluidity

l        Resists fling-off and remains on the chain for maximum lubrication and protection

l        High stability and demulsibility in wet environments

l        Excellent rust, corrosion and deposit resistance

l        Non-toxic/non-hazardous

 

Applications

The following types of compressor applications have shown excellent performance with the ArChine Comptek FPC 32 oil:

u    Primarily recommended for rotary screw and vane air compressor

u    Very effective in screw type compressors with oil injection cooling

u    Units operating under severe conditions

u    Multistage units with a history of excessive oil degradation from mineral oil-based products

u    Compressor systems with critical gears and bearings

u    Compressors used in stationary and mobile applications

u    For spiral freezers operating at extremely low temperatures including cryogenic-freezing temperatures

TYPICAL PROPERTIES*:

ISO Grade	32
Appearance	Yellow, transparent liquid
Density@ 20℃, g/cm3	0.838
Viscosity @40°C, mm2/s	30.5
Viscosity @100°C, mm2/s	5.53
Viscosity Index	120
Pour Point, °C	-51
Flash Point, °C(open cup)	232
Foaming   24℃,          93.5℃,        after24℃	10/0 20/0 10/0
Copper corrosion,100°C/3hr, grade	1b

*Typical data shall not be used as product specifications.