| Place of Origin: | China (Mainland) |
|---|---|
| Brand Name: | GIGA |
| Model Number: | giga19 |
| size: | 915*1830 1220*2440 |
Quick Details
Specifications
as top 30 plywood brand,GIGA plywood are all two hot pressing and reuse more than 10 times ,they have passed ISO9001,BV,CE.they are sells well in South Aferica, Australian, America,and enjoy god reputation at home and abroad
GIGA was founded in 1997, all of GIGAwaterproof plywood are two times hot press,GIGA film faced plywood is suitable for outside high-end and high-rise construction and bridge construction.It's large breadth make it able to reduce the quantity of seam and improve the working efficiency of membrane.And it is Mainly used in high-rise buildings, shear wallVertical wall panel and dam, tunnel and overpass, such as Bridges, arch bridge beams .
GIGA plywood information
| film color | black/brown/red | |
| core materials | poplar | |
| Glue | urea-formaldehyde resin | |
| phenolic resin | ||
| melamine | ||
| Size(mm) | 1220*2440 | 915*1830 |
| Thickness | 12mm | 12mm |
| 13mm | 13mm | |
| 14mm | 14mm | |
| 15mm | 15mm | |
| 17mm | 16mm | |
| 18mm | ||
| Tolerance of thickness | 12mm+-0.5mm 15mm+-0.5mm 18mm+-0.5mm | |
| Usage | construction | |
| Reuse times | 10-15 | |
| Surface abrasion | 0.04g/100r | |
| Bonding strength | 1.72Mpa/mm2 | |
| Modulus of elastictity | 5017Mpa/mm2 | |
| Crack,delaminating | NONE | |
| Edge defects | NONE | |
| Warpage degree | <10% | |
| Payment terms | L/C T/T D/P or as you required | |
| Certificate | ISO9001:2000 | |
plywood characteristic
1.standard size:915*1830mm/1220*2440mm
2.thickness:12mm-18mm
3.glue:WBP or melamine gluemade by ourselves without any impurity
4.melamine plywood can be re-used 10-15times.wbp plywood can be re-used 15-20times .
5.whole piece of poplar cores rather than fragment
6. two times hot pressing procedure by which the surface will be more smooth, flat and bright rather than only one time.
Mode of use :
- carbide saw blade with more than 80 gears should be used to cut the plywood , and about 1 cm above the plywood also the rotate-speed should not be less than 4000 per minutes .
- if the plywood is cut to drill hole , then specis\alized edge banding paint should be used along the edge of the whole .
- during the machine ,adhesive tape should be used for the joint for horizontal plywood , and sponge strip should be used for vertical plywood .
- we should put a batten below the plywood when we mail or drill in case of any crack…
- when remove the plywood , we should avoid dropping of large area .