| Place of Origin: | Japan |
|---|---|
| Brand Name: | SUNX |
| Model Number: | FX-101 |
| Usage: | |
| Theory: | |
| Output: | Digital Sensor |
Quick Details
Specifications
NPN output,12-24VDC for SUNX fiber optic sensor FX-101. Our main brands: KEYENCE,OMRON,SUNX,TAKEX,SMC,AUTONICS,SICK.Our products :sensor,switch,relay,encoder,PLC,power supply,ect.Reasonable price,excellent quality!
Specifications:
Specifications:
| Type | Standard Type | Long distance type | ||||
|---|---|---|---|---|---|---|
| Cable Set | Cable Set | |||||
| Model | NPN output | FX-101-CC2 | FX-101 | FX-102-CC2 | FX-102 | |
| PNP output | FX-101P-CC2 | FX-101P | FX-102P-CC2 | FX-102P | ||
| power voltage | 12-24V DC±10% | |||||
| Consumption current |
| |||||
| Output | <NPNshutsuryokutaipu> PNP open-collector transistor Maximum source current: 100mA Applied voltage: 30V DC or less (Output - + V between) Residual voltage: 1.5V or less (outflow current 100mA) | |||||
| Output operation | Is switched in when light enters ON / non-light incident upon ON SET mode | |||||
| Short-circuit protection | Equipment | |||||
| External input | <NPNshutsuryokutaipu> PNP non-contact input -Signal conditions High: +4 V- +VDC(0.5 ~ 3mA sink current) Open or 0 -+0.6 V DC: Low Input impedance: about 10kΩ | |||||
| Response time | 0:250 μs following floodlight frequency (factory settings) 1:450 μs following floodlight frequency 2:500 μs following floodlight frequency 3:600 μs following floodlight frequency | 1:2.5 ms following light projection frequency (factory settings) 2:2.8 ms following light emitting frequency 3:3.2 ms following light emitting frequency 4:5.0 ms following light emitting frequency | ||||
| Ambient resistance | Ambient temperature | (: 8-16 units in close contact -10 - +50 ℃,: -10 -+45 ℃ 4 - 7 units in close contact) (however, with no freezing and condensation) -10 - +55 ℃ Storage: -20 - +70 ℃ | |||
|---|---|---|---|---|---|
| Ambient humidity | 35 - 85% RH, Storage: 35 - 85% RH | ||||
| Ambient illuminance | 3,000 * below the light-receiving surface illumination: incandescent lamp | ||||
| Withstand voltage | AC1, 000V 1 minute live parts to case (Note 3) | ||||
| Insulation resistance | At DC250V 20MΩ or more mega whole charging part to case (Note 3) | ||||
| Vibration resistance | 2 hours 10 ~ 150Hz double amplitude 0.75mm XYZ each direction endurance | ||||
| Impact | 5 times (about 10G) XYZ each direction endurance 98m/s2 | ||||
| Material | Case: Polycarbonate, key switch: polycarbonate, fiber lock lever: PBT | ||||
|---|---|---|---|---|---|
| Connection method | Connector-connected (Note 4) | ||||
| Wiring length | Possible up to the full length of the 100m at the cable 0.3mm2 or more | ||||
| Weight | 15g | 15g | 15g | 15g | |

