Product Main

Quick Details

Place of Origin: Japan
Brand Name: SUNX
Model Number: FX-301
Usage:
Theory:
Output: Digital Sensor

Specifications

Hot deal! Digital Fiber Sensor FX-300 series FX-301, SUNX sensor.

Our main brands:
KEYENCE, OMRON, SUNX, TAKEX, SMC, AUTONICS, SICK.

Our products :
sensor, switch, relay, encoder, PLC, power supply, ect.


Specifications:
Type Standard Type Long distance type
RED LED Blue LED GREEN LED Infrared LED
Model NPN output FX-301
(-C1) 		FX-301B FX-301G FX-301H
PNP output FX-301P
(-C1) 		FX-301BP FX-301GP FX-301HP
power voltage 12-24V DC±10%　
Consumption current

< Red light / infrared light type>
Normal operation: 960mW or less (power supply voltage 24V Current consumption 40mA or less),
ECO mode is selected: 600mW or less (power supply voltage 24V Current consumption 25mA or less)
< Blue light / green light type>
Normal operation: 720mW or less (power supply voltage 24V Current consumption 30mA or less),
ECO mode is selected: 430mW or less (power supply voltage 24V Current consumption 18mA or less)

Output

< NPNshutsuryokutaipu>
NPN open-collector transistor
Maximum sink current: 100mA (50mA if five or more consolidated)
Applied voltage: 30V DC or less (between output-0V)
Residual voltage: 1.5V or less
(At sink current 100mA, 50mA 5 in more than one connection)

< PNPshutsuryokutaipu>
PNP open-collector transistor
The maximum drain current: 100mA (50mA if five or more consolidated)
Applied voltage: 30V DC or less (Output - + V between)
Residual voltage: 1.5V or less
(At the outflow current 100mA, 50mA 5 in more than one connection)

Output operation Is switched in when light enters ON / non-light incident upon ON SET mode
Short-circuit protection Equipment
External input

< NPNshutsuryokutaipu>
NPN non-contact input
-Signal conditions
Open or +8 V - + VDC: High
Low: 0- +2VDC(drain current less than 0.5mA)
Input impedance: about 10kΩ

< PNPshutsuryokutaipu>
PNP non-contact input
-Signal conditions
High: +4 V- +VDC(0.5 ~ 3mA sink current)
Open or 0 -+0.6 V DC: Low
Input impedance: about 10kΩ
Response time [H-SP (only red light type)], [STD / SD (only red light type)], and selected by the (LONG) jog switch 2ms or less (FAST), 250μs 150μs or less below 65μs or less [H-SP (only red light type)], [STD / SD (only red light type)], and selected by the (LONG) jog switch 2ms or less (FAST), 250μs 150μs or less below 65μs or less
Ambient resistance Ambient temperature (However, with no freezing and condensation), (-10 ~ +45 ℃ 4 ~ 7 units in close contact: 8-16 units in close contact -10 ~ +50 ℃, ) Storage: -10 ~ +55 ℃ -20 ~ +70 ℃
Ambient humidity 35 - 85% RH, Storage: 35 - 85% RH
Ambient illuminance 3,000 * below the light-receiving surface illumination: incandescent lamp
Withstand voltage AC1, 000V 1 minute live parts to case (Note 3)
Insulation resistance At DC250V 20MΩ or more mega whole charging part to case (Note 3)
Vibration resistance 2 hours 10 ~ 150Hz double amplitude 0.75mm XYZ each direction endurance
Impact 5 times (about 10G) XYZ each direction endurance 98m/s2
Material Case: Heat-resistant ABS, case cover: Polycarbonate, MODE key: acrylic,
Jog Switches: Heat-resistant ABS (FX-301B/G/H acrylic)
Connection method Connector-connected (Note 6)
[FX-301 (P)-C1 is 0.15mm2 3-core cab tire cable with 1m]
Wiring length The total length of 100m at a cable 0.3mm2 or more
(: 50m, 9 ~ 16 units when expanding: 20m 5 ~ 8 units when expanding)
Up to
Weight 20g [Cable Type FX-301 (P)-C1 is about 60g] 20g [Cable Type FX-301 (P)-C1 is about 60g] 20g [Cable Type FX-301 (P)-C1 is about 60g] 20g [Cable Type FX-301 (P)-C1 is about 60g]