?? Home booster circulator

Model: FPA15-90

 

It is a circulating pump designed for pressure boosting of water in domestic properties. The pump provides additional pressure to showers,taps and similar outlet points for domestic water. The pump incorporates or connects a flow switch which starts and stops the pump when a tap is turned on or off.

 

The pump selector can be set to the positions OFF, AUTO and MANUAL .When the selector is in the position MANUAL, at least one tap must be open. Otherwise the pumped liquid may over heat.
 

Selector in position

Position             The pump...
Ⅰ                        OFF
                            is switched off

Ⅱ                        AUTO
                            starts and stops automatically

Ⅲ                        MANUAL
                            run continuously (Also if taps are turned off)

Materials:

1) Motor Wire: Copper

2) Rotor can: Stainless steel

3) Impeller: PP

4) Shaft: Ceramic

5) Pump body: Cast iron

6) Bearing: Ceramic

7) Back Plate: Stainless steel

Liquid:

Liquid temperature range: +2°C  ~ +70 °C

Ambient temperature up to 40°C
Sound pressure ≤ 45 dB(A)

 

Flow and head:

1) Max. Flow: 1.5 m3 /h

2) Max. Head: 9m

Electrical data:

1) Power input max.: 120W

2) Single phase 110V~127v. 220V~240V
3) Available both in 50HZ and 60HZ
4) Insulation class F
5) Protection Ip44

Installation:

1) Size, pipe connection: G3/4",DN15mm

2) Port to port length: 160mm

3) Max. Operating pressure: 6bar

4) Pressure stage, pipe connection: PN6

 

Keep the shaft horizontal

 

 

 
 

Hereafter pls find the list of all the models of  home booster circulators