ZJC-T Series Waste Turbine Oil Recycling Oil Purifier

• After years of study, We have developed the fifth-generation vacuum filter specially intended for turbine oil. 
• Dry air addition, vacuum swirl separation, and graded deep filtering, the filter can quickly split the emulsion of the turbine oil.
• Dehydrate and degas the oil and get rid of impurities, thus to completely make the turbine oil clear and raise th grade of set maintenance. 
• Its efficiency is several times that of old-style filtering equipment. 
• The filter can also effectively remove oil sludge and glue and improve oil's color when combined with BJ series.
Features of oil purifier
         1.  Adopt the separated equipment of inflator employs particular spinning disk and stainless steel machine with dehydration and air pump and enlarges the area of segregating and coming to three-dimensional evaporation so that obtain the enough time to boil away. In this way purifier could achieve the best effect.
        2. Using new type of heating equipment , it can reduce heating burthen and extend oil life.
 
        3. The water cycled vacuum-pump from abroad lubricates by coolant (or water) and that it never afraid that air enter in the vacuum-pump. It will solve your problem that the spinning vacuum-pump which using fluid as medium need always exchange oil.
 
        4. Oil level control adopt photoelectric way which the main components is imported from Switzerland and have features of sensitive control, exactitude so much as feel the spume of oil. Spurting oil phenomena is never appeared. 
         5. With advantages of no leakage,low noise and long using life, this series of products adopt special input-oil pump which be airproofed by our factory.
 
        6. In order to meet customer's needs of choosing right filter, we have scientific design and exact filter assemblies which could exchange by ones abroad. Both cost and oil disposal effect are good.
 
 II.Same series Oil Purifier

Item

Name of Parameter

Type Unit

ZJC0.6KY-T

ZJC1.2KY-T

ZJC1.8KY-T

ZJC3KY-T

ZJC6KY-T

ZJC9KY-T

ZJC12KY-T

ZJC18KY-T

Technical parameter of the product

Nominal flow capacity

L/min

10

20

30

50

100

150

200

300

Working Vacuity

Mpa

-0.07 ~ -0.101

Working pressure

Mpa

≤0.35

Working temperature of Oil

°C

45-65

Working power

50Hz    380V    3-Phase 4-Wire

Total electric power

KW

6+1.5

9+1.5

12+1.5

30+3

2X30+4.4

3X30+6

3X30+7

4X30+11

Diameter of inlet outlet hose

mm

32/25

32/25

32/25

38/32

44/38

48/44

64/48

76/64

Appearance dimension

cm

130X100X125

130X105X145

130X105X145

190X140X195

190X140X210

210X150X215

220X160X225

230X170X230

Weight of product

Kg

320

380

450

850

1100

1500

2000

2900

Oil treatment index

Water content

ppm

≤100

Viscosity

mm2/s

≤20% in comparison to the original bias value of new oil

Filtering accuracy

μm

≤5

Demulsibility

min

≤15

Cleanness

NAS grade

≤NAS 6

Oil appearance

Transparence