Product Main

Quick Details

Place of Origin: Japan
Brand Name: SUNX
Model Number: DP-102
Usage: Pressure Sensor
Theory:
Output: Digital Sensor

Specifications

Shenzhen Di Ao Si Automation Co., LTD sells SUNX pressure sensor DP2-41Z/DP2-61Z , Spec: 100kPa , 12~24V DC+10/-15 %, 50mA or less.

We have advantage s in KEYENCE/OMRON/SUNX/TAKEX/SMC/AUTONICS/SICK. Products: sensor, switch, relay, encoder, power supply, PLC, ect. Excellent quality and good service! Please feel free to contact us , we will give you the best service in return.

Specifications:

Type Standard High functionality
For low pressure High pressure For low pressure High pressure
Model NPN output DP-101Z(-M) DP-102Z(-M) DP-101ZA(-M) DP-102ZA(-M)
PNP output DP-101Z(-M)-P DP-102Z(-M)-P DP-101ZA(-M)-P DP-102ZA(-M)-P
Kind of pressure Gauge pressure
The rated pressure range -100.0～+100.0kPa -0.100～+1.000MPa -100.0～+100.0kPa -0.100～+1.000MPa
Set pressure range -101.0～+101.0kPa -0.101～+1.010MPa -101.0～+101.0kPa -0.101～+1.010MPa
Withstanding pressure 500kPa 1.5MPa 500kPa 1.5MPa
Applicable fluid Non-corrosive gas
Power voltage 12～24V DC±10%　
Consumption current Normal operation: 720mW or less (power supply voltage 24V current consumption less than 30mA)
ECO mode: 480mW or less at the time of STD (power supply voltage 24V Current consumption 20mA or less), 360mW following FULL-time (power supply voltage 24V Current consumption 15mA or less)
Comparison output
(Comparison output 1,
Comparison output 2)

< NPNshutsuryokutaipu>
NPN open-collector transistor
Maximum sink current: 100mA
Applied voltage: 30V DC or less (comparison between output-0V)
Residual voltage: 2V or less (sink current 100mA)

< PNPshutsuryokutaipu>
PNP open-collector transistor
Maximum source current: 100mA
Applied voltage: 30V DC or less (comparison output - + V between)
Residual voltage: 2V or less (outflow current 100mA)

External input (Note 4)
[Auto-reference function
/
Remote zero adjustment function] 		-

< NPNshutsuryokutaipu>
ON voltage: 0.4V DC or less
Open or 5 ~ 30V DC: OFF voltage
Input impedance: about 10kΩ
Input time: 1ms or more

< PNPshutsuryokutaipu>
ON voltage: 5V ~ + V DC
Open or 0.6V DC following: OFF voltage
Input impedance: about 10kΩ
Input time: 1ms or more

Analog voltage output
(Note 4) 		- Output voltage: 1 ~ 5V
5% F. S. Within 3V ±: zero point
5% F. S. Within 4V ±: span
F. S. Within ± 1%: linearity
Output impedance: about 1kΩ 		Output voltage: 0.6 ~ 5V
5% F. S. Within 1V ±: zero point
5% F. S. Within 4.4V ±: span
F. S. Within ± 1%: linearity
Output impedance: about 1kΩ
Analog current output
(Note 4) 		- Output current: 4 ~ 20mA
5% F. S. Within 12mA ±: zero point
5% F. S. Within 16mA ±: span
F. S. Within ± 1%: linearity
Load resistance: 250Ω (maximum) 		Output current: 2.4 ~ 20mA
5% F. S. Within 4mA ±: zero point
5% F. S. Within 17.6mA ±: span
F. S. Within ± 1%: linearity
Load resistance: 250Ω (maximum)
Display pressure range -101.0～+101.0kPa -0.101～+1.010MPa -101.0～+101.0kPa -0.101～+1.010MPa
Indicator light Orange LED
(1 operation indicator comparison output, 2 operation indicator comparison output: comparison output ON lighting) 		Orange LED
Comparison output ON lighting: 1 Operation indicator (comparison output
Lighting set): Analog output operation indicator light
Environment resistance Protective structure IP40(IEC)
Ambient temperature Storage -10 ~ +50 ℃, : -10 ~ +60 ℃
Ambient humidity 35 ~ 85% RH (however, with no freezing and condensation), Storage: 35 ~ 85% RH
Withstand voltage AC1, 000V 1 minute whole charging part to case
Insulation resistance Whole charging part to case 50MΩ or more at DC500V mega
Vibration resistance 2 hours 10 ~ 500Hz double amplitude 3mm XYZ each direction endurance
(2 hours 10 ~ 150Hz double amplitude 0.75mm XYZ each direction endurance panel mounted flat attachment is installed. )
Impact 3 times (about 10G) XYZ each direction endurance 100m/s2
Temperature characteristic ± 0.5% F. S. Within
(Referenced to +20 ℃ at the time) 		± F. S. Within 1%
(Referenced to +20 ℃ at the time) 		± 0.5% F. S. Within
(Referenced to +20 ℃ at the time) 		± F. S. Within 1%
(Referenced to +20 ℃ at the time)
Material Case: PBT (glass fiber case)
LCD display: acrylic
Pressure port: SUS303
Mounting screw: Brass (nickel plated)
Switch unit: silicone rubber
Connection method Connector connection
Wiring length It can be up to (30m less than with CE marking time) 100m via a cable of 0.3mm2 or more
Weight Body weight: about 40g (short port type: about 30g), packing Weight: about 130g (short port type: about 120g)