| Condition: | New |
|---|---|
| Application: | Produce C,Z Purlin |
| Production Capacity: | 15m/min |
| Place of Origin: | China (Mainland) |
| Brand Name: | FSM |
| Model Number: | C80-300 |
| Voltage: | 415V |
| Power(W): | 15KW |
| Dimension(L*W*H): | 11000mm*1400mm*1400mm |
| Weight: | 14000KG |
| Certification: | ISO |
| Warranty: | One year |
| After-sales Service Provided: | Engineers available to service machinery overseas |
Quick Details
Specifications
15KW main power C Z Purlin Roll Forming Machine With Hydraulic / Manual Decoiler
A simple introduction of this machine
- Profile : C,Z purlin
- Material Thickness:1.5-3mm
- Working speed:15m/min(not include punching and cutting time)
- Roll station: 18 stations
- Roller material :GCr15,quenched
- Type of roller driven:motor or hydraulic
- Control of machine:PLC Panasonic
- Main power:15 KW
- Hydraulic power:7.5 KW
- Transmission :transmission by gearbox
- Machine mainly consists of hydraulic/manual decoiler, coil sheet guiding device, flattening device, roll forming system, punching equipment, cutting equipment, hydraulic station,PLC controlling system and support table.
- The Z shape purlines formed by Z Shaped Purlin Forming Machine have excellent anti-bending property and are easy to install.
- This machine adopt PLC control system,the size of Z purlin height and weight can be adjusted through the Panel touch.
Details of Z purlin roll forming machine
Item | Description |
Material of roller : | GCr15,quenched |
Material of shaft : | 45#forge steel |
Material of punching mold : | Cr12 HRC 58-62 |
Material of cutting blade : | CR12with heat treatment |
Main power : | 15KW |
Hydraulic power : | 7.5KW |
Working speed : | 15m/min(not include cutting and punching) |
Forming stations : | 18 stations |
Control system : | PLC Panasonic |
Transmission : | By gearbox |
Automaticity : | Semi-Automatic/Automatic |
Main dimension(L,W,H) : | 11000mm*1400mm*1400mm |
Total weight : | 14000KG |
Main parts of Z purlin roll forming machine
NO. | Name | Unit | Qty |
1 | Roll Forming Main Machine | Set | 1 |
2 | Hydraulic/Manual decoiler | Set | 1 |
3 | PLC Control System | Set | 1 |
4 | Hydraulic Punching Device | Set | 1 |
5 | Hydraulic Cutting Device | Set | 1 |
6 | Hydraulic Station | Set | 1 |
7 | Manual Out Table | Set | 2 |
Details of main parts
Name | Describe |
Control panel (PLC Panasonic) | The machine will automatically cut to length and stop when requiredquantity is achieved. |
Control panel:button-type switch and touch screen | |
The program should be can set 5 different measure and quantity. | |
Tolerance of length: 3m+/- 1.5mm | |
Voltage,Frequency,phase:415V,50HZ,3Phase | |
Punching and cutting device | Punching with hydraulic drive |
Punching in longitude wise controlled by PLC | |
Punching at horizontal wise adjusted by manual hand wheel | |
Hydraulic Cutting before forming: Cut the sheet before roll forming to required length. | |
Cutting motion: The main machine automatically doesn't stop and the continue punching and cutting. | |
Hydraulic decoiler
| Hydraulic coiler car adopt motor advance (power:3KW, hydraulic up and down:12MPA) |
Single head to put the coil hydraulic flow over device. | |
Coil spec:Φ508×1300mm | |
Flow over range:Φ460-520mm | |
Oil cylinder:Φ160×90mm | |
Transmission:drive by hydraulic brake | |
Load bearing:5T,10T,20T |