Overview

International design working condition of the cooling tower: water inlet Temperature t1 = 37; water outlet temperature t2 = 32wet bulb temperature t = 28dry-bulb temperature=31.5atmospheric pressure=9.94X104pa.

the standard cooling tower of the company is designed according to the National working condition. We can also provide special design for non-standard Working condition to customers.

Due to site limitation or modeling requirement, the company especially design and custom make the cooling tower according required dimensions. Contact us for Details.

Base bearing surfaces are in a same horizontal plane and its elevation and Each dimension error is less than 5mm.

Base height of the cooling tower h2 should be determined according to the Pipe diameter of the water outlet pipe and installation height.

Our company will provide connection balance pipe and balance base plate water Level when assembling two or more than two towers.

If users require our company increase the water outlet flange bore diameter, Please note it when ordering.

the measuring point for noise at from the Dm point of the cooling tower Equivalent diameter.
Dm = Height above ground is 1.5 meters, where L, W is )

Pipe connecting chart is the pipe connecting position dimension of one unit, Multiple units assembly is in the same way.

When a different models tower are connected, the base plate water level Height (size E) of different model tower must be considered to adjust basic Height to maintain the water level balance of all towers.

Pictures and technical parameters in samples are for your reference only. Our Company reserves the right to improve constantly, modify product appearance and Technical parameters.

Product structure

the high-quality raw material PVC sheet in use is processed by hot press Molding or vacuum molding; the tower is designed in the whole suspension and can Resist corrosion and biological erosion; the unique 3D folded hole design is Featured with extremely high water collection efficiency and extremely low air Resistance and can control drift loss below 0.0005% of circulating water so as To save water energy in maximum and prevent the transmission of legionnaires Disease bacteria.

Structure details:

the characteristics of opened cooling tower -FKH

New technologyThe whole cooling fin based on advanced technology optimizes Design structure and makes reasonable volume.

New materialThe improved fireproof PVC raw material is used as the material Of cooling fin and FRP is made of the latest improved material in USA.

New processThe primary molding of adsorption plastic mould is adopted. The Split jointing is used for structure, rapid and firm.

New product Cooling performance is 105%, drift rate is not more than 0.001% and the new product is characterized by novel appearance, reasonable structure and equitable price. the combined tower can be assembled according to site Conditions.

Belt (rubber) cast ironFRPBelt cover (FRP) Electric motor (fully-enclosed) FRPAir duct (FRP) Fan shellaluminium alloy: Air blower for Wing unit (Hot dip galvanized steel) Ladder (hot-dip galvanized steel) PVCInner Connecting pipePVC FRPWater spray basin coverFRPFRPSide plateFRPFRPAccess DoorFRPAisleHot dip galvanized steelPPWater distribution sprayerPPPVCSpray Packing (flame retardant PVC)
Flange for outlet water (hot-dip galvanized Steel) FRPSump basinFRP