Overview

1. the double inlet cooling tower is manufactured through adding a second Coil pipe and PVC heat exchange layer to the single air blower system on the Basis of one inlet design, so as to achieve better performance and lower energy Consumption at the minimum flat area.

2. Double inlet evaporative condenser can reach the maximum industrial Capacity with only one module, so the double inlet cooling tower is the ideal choice for large Project;

3. Two way coil pipe can achieve the purpose of cooling different medium Within a same tower.

Product structure

Closed cooling tower combines the function of cooling tower and heat exchange Together. It reduces the temperature of process fluid till it is close to air Wet bulb temperature. When the system works, process fluid for cooling will flow Inside of serpentiform coil of heat exchanger. The spray system is outside for Moistening coil surface continually. The water spraying on the coil flows to PVC Heat exchange layer with efficient cooling effect for cooling. Then, it falls on Water collection tray for recycling.

Structure details:
I. the main engine of closed Cooling tower is composed of parts including shell, heat exchanger, fan, spray Water pump, water collector, flume and pipe valve. Closed cooling tower combines the function of cooling tower and heat exchange together. It reduces the Temperature of process fluid till it is close to air wet bulb temperature. When The system works, process fluid for cooling will flow inside of serpentiform Coil of heat exchanger. The spray system is outside for moistening coil surface Continually. The water spraying on the coil flows to PVC heat exchange layer with efficient cooling effect for cooling. Then, it falls on water collection Tray for recycling. Meanwhile, the air is sucked and it passes the coil and PVC Heat exchange layer so as to make some water evaporated. All moisture in airflow Is collected by splash eliminator and then it is sent back to water collection Tray. after that, it is evaporated and the heat is carried away from spray Water. As a result, the coil and process fluid in the coil are cooled.

2. the new and unique coil design applies serpentiform coil and guarantees Certain inclination angle. as a result, when the coil is not used, the medium Water in the cooler can be discharged completely so that the coil cannot be Frozen after shutdown in winter for users in the north and service life of Cooler can be prolonged.

3. There is unique inclination, efficient dehydration and low win resistance Dehydrator; this unique patent dehydrator design guarantees efficient Dehydration (high evaporation and reduces consumption of spray water) on one Hand. It can reduce wind resistance of fan and make the design become more Reasonable on the other hand.

in order to guarantee long term and stable operation of closed cooling tower, Our company follows perfect ISO9001 international quality assurance system Procedure and CTI standard on each link of design, selection, production and Purchased parts. We strictly follow all specifications and make products meet Design and operation requirements finally.