Specifications Double Stage Vacuum Transformer Oil Filtration machine 
1.Degassing, dehydration and filtering impurities 
2.Double Stage Vacuum 

High Cost-Efficiency Double Stage Vacuum Transformer Oil Filtration machine, Degassing, dehydration and filtering impurities

 

As is well known the Transformer plays an important role in the generation, transmission and distribution of electrical energy. Under load the transformer, dissipates heat and the insulating oil acts as a coolant as well as an effective dielectric. 
Due to the highly hygroscopic nature of the transformer oil, it absorbs moisture from windings, which leads to gradual deterioration of dielectric strength. Also there are some waste impurities, gas contents in the transformer oil which destroy the oil's quality.
--The series ZYD-I Double-stage vacuum Transformer oil regeneration  plant is designed for the following application:
I. Degassing, dehydration and filtering impurities of transformer oil 
II. Remove acidity, sludge, free carbon, other soluble oil decay products and discoloration
III. It can vacuum filling oil to transformer, vacuum dry transformer and on-line operation transformer .  
IV. It is mainly used for purifying the insulating oil, transformer oil, mutual oil, switch oil, dielectric oil and so on. The standard ZYD-I system is designed for processing oils in workshops, in storage tanks or directly in transformers (energized or de-energized transformers).
The series ZYD-I Double-stage vacuum Transformer oil regeneration purifier not only provide dewaters, degases and remove impurities, but also remove acidity, sludge, free carbon, other soluble oil decay products and discoloration. 
Feature: 
1. This machine is high effective and portable, which is very suit to operate on line. Also it can be used to dry the electric equipment and input the oil into the electric equipment under the vacuum state.
2.The machine adopts the double-infrared liquid automatic controller, sensitive automatic pressure protector and the high effective equipment for degas, so it is easy to operate.
3. High vacuum limiting vacuum less than 5pa, working vacuum less than 35pa.
4. High absorption speed, absorption speed power more than 333L/Sr.
5. Duplex 3D stereo-evaporation technology, eliminating the liquid water very effectively.
6. UK G technology by which the trace water that is show chain, such as dissolved water, can be removed effect.
7. Distinctive removing impurities technology filtering through double FH trapezoidal network and absorbing by high polymer without the mechanical power.
8. Carbon fiber infrared heating system that can make the oil contains zero sum of ethyne after treatment.
9. The oil of any grades can be treated on line at the working site.
10. The Automatic oil purifier model is installed with PLC (Programmable logical control  system) which can control the equipment automatically to every stage of its process and ensure its process and ensure its safe operation on site and on line without human supervision. 
11. Can be operated both on-line and off-line.
(oil filtration, oil purification, oil treatment, oil purifier, oil recycling, oil processing, oil filtering, energy saving, oil regeneration, oil processor, oil filter, oil process, oil purify, oil regenerating, oil restoration, waste oil disposal, oil reclaimed, oil reclaiming, waste oil management, oil regenerate, oil reconditioned, oil reconstituted, oil restituting, oil recovering, oil recondition, oil filters, oil refinery, oil refiner, oil cleaning, oil recycle, oil reclaiming, oil separator, oil recovery, oil recycle, oil reclamation, oil refinery, oil separator, oil separation, oil purifiers, oil recondition)

 

Technical Parameters:  

Parameters		Unit	ZYD-30	ZYD-50	ZYD-100	ZYD-150	ZYD-200	ZYD-250	ZYD-300
Flow Rate		L/h	1800	3000	6000	9000	12000	15000	18000
Working vacuum		MPa	-0.08 ~ -0.099
Working Pressure		MPa	≤0.3
Temperature Range		°C	20 ~ 80
Power			Three Phase 50Hz,380V (or as needed)
Working Noise		dB(A)	70	70	70	75	75	75	75
Heating Power		KW	28	30	45	60	75	90	120
Total Power		KW	35.5	37.5	52.5	71.4	86.5	102.5	135
Inlet/Outlet		mm	φ25	φ32	φ42	φ50	φ50	φ60	φ60
Weight		Kg	600	800	1050	1400	1800	2000	2200
Overall	Length	mm	1050	1100	1200	1450	1600	1800	1900
	Width	mm	750	800	950	950	1100	1200	1200
	Height	mm	1350	1400	1500	1650	1800	1900	1900

Guarantee Value

Item	Unit	After treatment
Breakdown Voltage	kV	≥75
Moisture content	PPM	≤3
Gas content	%	≤0.1
Impurity size	micron	≤0.5 (no free carbon)