The RemoDAQ-8018B is a 16-bit, 8-channel analog input module that provides programmable input ranges on all channels. These modules are an extremely cost-effective solution for industrial measurement and monitoring applications. 3000 VDC optical isolation between the analog input and the modules protects the modules and peripherals from damages caused by high input voltages.

Main Feature:
 

◆ 16-bit resolution

◆ 8 different input

◆ 3000VDC Isolation

◆ Over Voltage protection: ±35V

◆ 10 samples/second

◆ Input type: Thermocouple

◆ Input Range:  ±20mA, 4-20mA, J 0-760℃, K 0-    1370℃, T 100-400℃, E 0-1000℃,R 500-1750℃,    S 500-1750℃, B 500-1800℃

◆ Support Modbus/RTU Protocol

◆ Burn-out Detection

Specification:

Display		LED Indicators		Power
Power Supply		Power Requirement		10~30 VDC
		Power consumption		1.2W/24VDC
Analog Input		Resolution		16-bit
		Channels		8 differential
		Channel Independent Configuration		Yes
		Direct Sensor Input		J, K, T, E, R, S, B Thermocouple
		Current Input		±20 mA , 4-20mA
		Sampling Rates		10 samples/second
		Burn-out Detection		Yes (All T/C)
		Input Impedance		Thermocouple: 20MOhm Current: 120 Ohm
		Zero Drift		±6 μV/℃
		Span Drift		±25 ppm/℃
General		Watchdog Timer		Yes
		Temperature (Operating)		-20~70 ℃
		Humidity		5~90%, non-condensing
		Temperature (Storage)		-25~85 ℃ (-13~185 °F)
		Interface		RS-485
		Isolation Protection		3000 VDC
		Overvoltage Protection		±35 V
		Error Range		±0.1%
		Communication Protocol		ASCII command & Modbus/RTU
		Comm. Distance		Serial: 1.2 km