| LED Reflector PAR20 Dimmable230V 10W specification |
| | Version:A01 |
| 1 | General Data |
| 1.1 | Rated Voltage [V] | 220~240 |
| 1.2 | Wide Voltage Range[V] | 180~260 |
| 1.3 | Surge Voltage [V] at 230V | 500 |
| 1.4 | Frequency [Hz] | 50/60 |
| 1.5 | Operating frequency [KHz] | >40 |
| 1.6 | Lamp Wattage [W] | 10.0(+10%/-15%) |
| 1.7 | Lamp Current [mA] | 62 |
| 1.8 | Power Factor | 0.7 |
| 1.9 | LED chip brand | Sharp |
| 1.10 | Dimming Range | Dimmable |
| 2 | Light Data [Initial] |
| 2.1 | Beam angle | 24°/35°/45° |
| 2.2 | Light intensity[cd] | 2000/1200/600 |
| 2.3 | Equivalent Lumen Output[lm] | 500 |
| 2.4 | Color Temperature [K] | 2700/3000/4000/5000 |
| 2.5 | Comparsion Wattage | 50W Halogen PAR20 |
| 2.6 | Color Rendering Index | 85 |
| 2.7 | Operating temperature range[℃] | -30 to +40 |
| 2.8 | Projected Lumen Maintenance @ 30,000 hours [%] | 90 |
| 3 | Life Time [at 230V, lot size min. 20 units] |
| 3.1 | Life Time at 230V, 25℃ [h] | 40,000 |
| 3.2 | Switching cycle up to 50% failure (30s on, 30s off) [cycles] | Unlimited |
| 4 | Geometrical Data |
| 4.1 | LED Number | 2 |
| 4.2 | Diameter (D) [mm] | 65±0.5 |
| 4.3 | Length (L) [mm] | 94±1.0 |
| 4.4 | Weight [g] | 145±5 |
| 4.5 | Base | E27 |
| 4.6 | RoHS | Compliant |
| 5 | Technical Data |
| 5.1 | Safety Requirement | According to IEC/EN60968 |
| | According to IEC/EN62031 |
| 5.2 | Performance Requirement | According to IEC/ENC60969 |
| 5.3 | Photobiological Safety | According to IEC/EN62471 |
| 5.4 | EMC Requirement | According to IEC/EN55015 |
| | According to IEC/EN61547 |
| | According to IEC/EN61000-3-2 |
| | According to IEC/EN61000-3-3 |
| 5.5 | Approvals | CE/Compliant |
| 5.6 | Color of plastic component | Grey/To be determined |
| 6 | Special Values |
| 6.1 | Flammability of plastic component | 94-HB |
| 6.2 | Transparent lamp cover removal safety | Torque 3Nm, 3kg pull force |
| 6.3 | Connection pins removal safety | 6kg pull force,3kg side force |
