PKE Smart Start System
 
2       Passive keyless entry
2       Button start
 
 
Special Notes:
2        Carry around the smart key during using the product.
2        Keeping staying in the car with ACC off may raise power consumption of smart key.
2        Make sure the vehicle gear is on neutral position before remote starting.
 
 
Meaning of the Button Icons on Smart Key:
 
              
Lock      Unlock          Ttrunk      Remote start
 
For details, please refer to USING THE SYSTEM.
 
 
TECHNICAL SPECIFICATION
 
PKE Part
·Main Unit Working Voltage: DC 9.0V~18.0V
·Standby Current: ≤30mA@12V
·LF Detecting Distance: ≈ 2.0m
·Smart Key Working Voltage: DC 2.0V ~ DC 4.0V
·Smart Key Standby Current: ≤4uA @3V
·Working Temperature: -40℃~ +85℃
·Remote Control Distance: ≈30m
BUTTON START Part
·Main Unit Working Voltage: DC 9.0V~18.0V
·Standby Current: ≤0.6mA@12V
·Working Temperature: -40℃~ +85℃
·Rated Outputting Current: 40A
 
 
USING THE SYSTEM
 
1.       PKE Functions
1) Approach the vehicle, system will unlock and disarm when it has detected the smart key.
 Prompt: the horn sounds twice and the turn lights flash twice.
2) Leave from the vehicle, system will lock and arm the security when it can't find the smart key.
     Prompt: the horn sounds once and the turn lights flash once.
      3) If one of the vehicle doors has not been closed well when the smart key leaving from the LF detecting range, the system will remind the user with sound and flashing.
     Prompt: the horn sounds 3 times and the turn lights blink.
 
2.       Button Start / Keyless Go

1) Starting / Stopping the Vehicle
·With braking: push down the ignition button. (When the brake pedal is applied, the ignition button will flash green.)
·Without braking: push down the ignition button for 1 second to start, and 3 seconds to stop.
2) ACC / ON
 Push down the button without braking, the system will change the status as below:
                     OFF>ACC>ON>OFF
3)Meaning of the Color on the Button
Color on the Button White Blue Green Purple
Vehicle Status OFF ACC ON START

 
3.       Remote Engine Start
Press down the  key for 3 seconds, the horn will sound 3 times, and the turn lights will flash 3 times, then the engine will be started. Press down the  key for 3 seconds again, the horn will sound once, and the turn lights will flash once, then the engine will be stopped.

Notice:
·The system will stop the engine after 10 minutes if the vehicle door has not been opened and the brake has not been applied since the engine was started remotely.
·If one of the vehicle doors has been opened once , the system will forbid stopping the engine by remote, please use the ignition button to stop.
·In the induction range, the system forbids starting and stopping the engine by remote.
 
4.       Automatic Window Closing (Optional)
The system can output a 12 seconds signal for closing windows when arming, this function is determined by the vehicle factory configuration and setting.
 
5.       Open Trunk by Remoting
Press down the  key for 3 seconds, then the trunk will be opened.To use this function,the trunk should be motor-driven.
 
6.       Alarm & Immobilizer Functions
1)At arming mode, if one the vehicle doors is forced opening or starting, the horn and lights will sound and flash and alarm, and the vehicle engine can not be started.
    Prompt: the horn sounds 25 seconds and the turn lights flash 30 seconds.
       2) Mute Arming Mode: there are no sounds when the door are locked or unlocked, or the system is alarming.
    Method:press down the + key for 3 seconds, the turn lights flash 3 times, then the system accesses to mute arming mode; Press down the + key for 3 seconds again, the turn lights flash 3 times, and the horn sounds 3 times,then mute arming mode will be canceled.
 
7. Power-saving Mode
If the smart key does not enter the system detecting range within 24 hours, the system will get into Power-saving Mode automatically. PKE will be disabled to decrease power consumption of the vehicle.
 
    At this mode, the system can't unlock automatically when you approach the vehicle, you can press the  key on the smart key to make the PKE active again.
 
8. Suspending PKE
Press down the + key on the smart key for 3 seconds, the turn lights flash 5 times, then the system will suspend the PKE section. Press the + key again, PKE will be activated.
Notice: If the PKE is suspended, the system will not detect the smart key, can't unlock and lock the vehicle automatically. The vehicle can be started after being unlocked by pressing the  key.
 
9.  Emergency Mode (Optional)
If you can't unlock the vehicle with the smart key, you can put your smart key close to        the backup antenna, 5 seconds later, the vehicle doors will be unlocked and the system will keep disarming within 60 seconds. Put your smart key close to the backup antenna again, the system will lock and arm.
   Notice:
· The engine should be started within 60 seconds after unlocking the door, or please lock the door again by putting your smart key close to the backup antenna 5 seconds, later, do it again to unlock the door.
· When you unlock the door with Emergency Mode, if you need to leave the car, please put your smart key close to the backup antenna to lock the vehicle.
· At Emergency Mode, the system does not give any prompt when unlocking and locking.
 
10. Locking on First Braking  
After the engine is started, the system will lock the doors of the vehicle when you step on the brake. The system will unlock the doors automatically when you turn the vehicle power off.
 
11. Car Finding
   To find your vehicle, you can press  key on the smart key, then the horn will sound once and the turn lights will flash once.