Description of  Cell Phone Security Alarm System :

Multi-port smart alarm system(burglar alarm system) are the economical choice  for modules where multiple merchandise are displayed .It can secure 4/6/8/10 gadgets simultaneously at retail or trade show environments .Build-in battery provides continuous security even during blackouts or major building power failure.When powered by AC current,it can also charge and power up tablet and mobile phones on display.

Features of   Cell Phone Security Alarm System

1.Quick reaction speed:Alarm will sound when the USB cable is pulled/cut

2.Once alarm is triggered ,disarmimg can only be done by host key(press remote control red key  to disarm)

3.Build-in alarm horn,high-volume alarm speacker are hidden in the chassis of the host to prevent tampering.Sound wire cannot be cut extermally.(Build-in external speacker jack from rear side host)

4.Remote controller offers ease of use

5.LED indicators to show port current status.

6.USB inferface ,ring type,mini end selectable,and cable length can be requested.

7.Wide range application:Digital stores,electronic stores or exhibitions for notebooks,tablets,cameras,etc.  

Can use for mobile phone/tablet pc and laptop for different brands. 

 Not only with alarm but also can charge to Phone and tablets

Anti-theft Operation:

When alarm is triggered,the smart alarm will sound for 30 seconds,while the corresponding port LED flashes repidly.Duty staff should check if equipment is damaged or cables disconnected .Investigigate if it is a false alarm or an attempt to steal.

To disarm,either press the button of the remote control(or disarm the alarm host with the on/off power

Payment: We accept T/T ,Western Union Or Escrow

Shipment :International courier(DHL/TNT/UPS/FedEx...)

                 By sea or by air with customer forwarder or our forwarder

How to set up the  Cell Phone Security Alarm System    

1.There double head connectors(USB and Detector) to USB cable.

2.Double head Micro USB connector plugs into Tablet or Smart phone USB port)

3.Tear off 3M sticker on detector and stick detector on tablet or smart phone surface.

4.USB connectors plug into host USB port(rear panel),and adapter cable plug into host(rear panel)

5.After all objects are connected,plug power cord in to AC outlet and press power button ,power LED turn ON.

6.The host once in active position,will give a beep sound (one time) and Red LED turn ON.

7.Please check LED panel ,the LED indicators should be Blinking, if not.pls unplug again,and press remote control Red button,until LED indicator is Blinking.

8.Active charge funtion:the host provide active charge funtion ,when plug AC power .it can charge automatically(smart phone,tabletpc,MP3 player etc.)