| Place of Origin: | |
|---|---|
| Brand Name: | |
| Model Number: | |
| color: | whtie |
Quick Details
Specifications
PET scrap for Injection molding/blow molding
PET is a milky white or light yellow highly crystalline polymers, the surface smooth and shiny. Creep resistance, fatigue resistance, abrasion resistance, high hardness, wear small, with the largest thermoplastic toughness; Electrical insulation properties, little affected by temperature, but poor corona resistance.
Non-toxic, weather resistance, chemical resistance and good stability, low water absorption, resistance to weak acids and organic solvents, but intolerant of hot water immersion, not alkaline.
Application: PET is used for making bottles such as mineral water bottles and buckets.
Specification
PET | |
Description | It is a milky white or light yellow highly crystalline polymers, the surface smooth and shiny. |
Grade | Injection molding/blow molding |
Application | It's used for making bottles such as mineral water bottles and buckets. |
Name | Polyethylene Terephthalate |
IV value(dl/g) | 0.800+0.015 |
Melting point | 250+3 |
Color(L value) | >82 |
Color(B value) | ,2.0 |
Acid value(meg/kg) | 35 Max |
Ash% | 0.01-0.05 |
AA content(ppm) | ,1.0 |
Pacing:1000kg per bag 20 ton loading in 20 FCL carton