General descriptions of Temperature humidity test room
This kind of testing rooms are mainly designed according to the national standard and user-defined requirements.It can simulate different environmental conditions, such as heat-endurance, cold-endurance, dryness-endurance, and humidity-endurance, which defines the performance of material. By testing the product under different environmental conditions to see whether its performance can meet the intended requirements.They are used for various types of testing such as prototype evaluation, research & development testing, production testing, accelerated stress testing, reliability testing, failure analysis, and any other application where environmental simulation is needed.

 

Applicable testing standards:

ASTM D2346, JIS K7212, DIN 50011, BS 2648, IEC-540

Standard Features of Temperature humidity test room

1. Programmable Controller with RS232C,  7″ LCD touch panel control

2. Stainess steel Interior, galvanized steel sheet exterior

3. 2pcs stainless steel loading shelves free

4. Multipane viewing window with heater

5. 60mm diameter feed-through port

6. Floor stand with castors, easy to mvoe and adjust height.

 

Technical specifications of temperature humidity test room

Model No				YWER
Inner chamber size W×H×D(mm)				Please refer to size chart, customization service available ( ^_^ )
Exterior chamber size W×H×D(mm)
Temperature Range				0°C, -20°C, -40°C, -60°C~+70°C(+80°C)
Humidity Range				30~90%RH
Performance		Temp.&Humi fluctuation		±0.3°C, ±2.5%RH
		Temp.&Humi.uniformity		±2°C, ±5%RH
		Temp.&humi. Resolution		0.1°C, 0.1%RH/0.01, 0.1%RH
		Heat up time (20°C~high temp.)	°C	80
			minutes	50
		Cool down time (20°C~low temp.)	°C	0	-20	-40
			minutes	55	70	100
Material		Exterior chamber material		Stainless steel plate+Powder Coated
		Interior chamber material		SUS#304 stainless steel plate
		Insulation		PU & Fiberglass wool
System		Wind Circulation		Sirocco fan
		Heating system		SUS#304 stainless steel high-speed heater
		Humidifying		Surface evaporating system
		Cooling		Imported compressor, finned type evaporator, air-cooling condenser
		Dehumidifying		ADP critical dewpoint cooling/dehumidifying method
		Controller		Digital electronic indicators + S.S.R.With PID automatic calculation capability
Other Components				Vacuum glass inspection window, cable port(60mm), control status indicator lights, chamber lamp, loading shelves (2pcs for free)
Safety Devices				Overheating circuit-breaker, compressor overload protection, control system overload protection, humidifying system overheating protection,breakdown indicator light
Power supply				AC 3 phase 380V 60/50Hz
Customization				Customization of inner chamber size, temperature&humidity range, etc.

 

Besides the temperature humidity test room, We can also manufacture and supply:   
Temperature humidity test Chamber, Temperature & humidity Control Host, Air Thermal Shock Tester, Liquid Thermal Shock Tester, Salt Spray Tester, Temperature & humidity & Vibration Combined Testing Chamber, Industrial hot air oven, Rain/Spray Testing Chamber, Burn-in testing equipment, Dust Tester, Steam Aging Tester, Electromagnetic High Frequency Vibration Tester, Tensile Test machine, Drop Test machine, etc.  

 

If you are interested in any item of our company, kindly please contact me for more information and quick response, welcome to visit us and look forward to serving your needs!