Brief introduction of Sand dust test cahmber

According to state-of-the-art manufacture the test cabinets are of a modular design and are ready to be installed. The whole system is designed to be used under extreme conditions and guarantees reliable functioning and a long service life. Independent of design and condition of the test specimen a constant dust density is reached due to special high-capacity compressed air nozzles, which leads to reliable test results.

Technical features of Sand dust test chamber

1. Provide a ready-made solution to common dust tests for automotive and electronic industryrequirements.

2. Suspension dust-proof test.

3. Using large transparent acrylic window, convenient and direct observation internal test condition.

4. Dust data conform to JIS-DD0207-F2 standard.

5. Digital setting, easy operation and maintenance.

Applicable testing standards:

IEC 60529, GB2423.37, GB4706, GB 4208, GB 10485, GB 7000.1, JIS-D0207-F2 , GJB 150.12, DIN...

General specifications:
Model		YDT-1000-F			YDT-1000-C(IEC-529)
Internal Dim. WHD(mm)		1000×1000×1000			1000×1000×1000
External Dim. WHD(mm)		1350×1950×1350			1350×1950×1350
Testing Type		F1	F2	F3	IEC60529
					C1	C2
Concentration of dust (mg/m3)		≥60000	≥3000	≥100	≥5000	≥100
Testing Temp.		20°C±15°C
Humidity Range		45%RH~85%RH
Flow rate of test (m/s)		No Iimited			5m/s	10m/s
Testing Time	Swiring time	5s/other			No
	Rest time	15Mins/other
	Total time	5H	8H	8H	2H	6H
Material	Exterior	SUS#304+Powder Coated
	Interior	SUS#304
Other Components		Chamber lamp, Wiper, Casters with adjusters.
Power Source[K. W]		AC 1Ψ 220V 60/50Hz 4KW
Comply with CHS D3069, IE529.

Structure of Sand dust test chamber

1. Chamber material: SUS#304 stainless steel;

2. Transparent window is convenient to observe specimen during testing;

3. Blow fan adopts stainless steel shell, high sealing and wing speed, low noise;

4. Inside the shell is the funnel type, vibration cycle can be adjusted, dust free float in the sky falling to blowing the hole together.

Working environment:

1, Temperature: 15~35'C; Relative humidity: 25~75%RH;

2, Without strong vibration and Electromagnetic effect around;

3, Test chamber should be stable placed and keep balance;

4, Installation place should keep good ventilation, and without strong airflow, high dust and corrosive material.

Besides the Sand dust test chamber, also manufacturing:

Temperature & humidity test Chamber, Temperature & humidity Control Host, Walk In environmental Test Room, Precision hot air Oven, Salt Spray Tester, dustproof hot Oven, Rain/Spray Test Chamber, Dust Tester, Glue dispensing machine, Air Thermal Shock Tester, Liquid Thermal Shock Tester, Temperature humidity & Vibration Combined Testing Chamber, Burn-in testing equipment, Steam Aging Tester, Electromagnetic High Frequency Vibration Tester, Tensile Tester, Drop Tester, etc.

Customization of inner chamber size and other specification is available upon request. Welcome to enquire and purchase.